Abstract:A novel design for providing a high field based on a semi-open split Nb-Ti superconducting magnet has been developed. It is to incorporate in the versatile multi-field test facility established for professional tests of field-dependent and mechanical behaviors of low-temperature and high-temperature superconducting wires and tapes. The semi-open split superconducting magnet (the peak magnetic field in the coil up to 7.8 T) is a good candidate to generate a transverse field in a large work region of Ø100 mm × H800 mm. On the other hand, its semi-open shaped configuration for samples makes it feasible for a non-contact optical technology of digital image correlation (DIC) for being utilized in full-field deformation measurements under extreme conditions. Since the irregular-shaped configuration and large deformation due to attraction; mechanical behavior of support structures of the magnet will be crucial for its stability and operation function. In this study, an internal reinforced cantilever structure for splitting the superconducting magnet poles was proposed to bear the large attraction from Lorentz forces and keep a stable configuration under operation conditions. Analysis based on a finite element method was performed to obtain deformation and stress profiles of the superconducting coil windings and reinforced cantilever structure with contact nonlinearity. The effect of geometrical parameters of the cantilever on axial displacements in the split magnet system was addressed. Experiments on excitation and quench of the assembled split superconducting magnet were performed at 4.2 K to capture strain responses. The numerical predictions showed reasonable agreements with the observations on structural stress/strain states. It indicated that an optimization analysis of the cantilever structure is necessary for a high-field irregular-shaped magnet system for its assembly and excitation.

Development of a multi-pancake HTS magnet operated in persistent current mode based on superconducting joint of REBCO coated conductors

Superconducting joint of REBCO wires for MRI magnet

Development of Electromagnetic Forming Nbti Superconducting Joint

A Pulsed Current Charging Mechanism for High Temperature Superconducting Magnets

Study on the Arrangement of REBCO Double-Pancake Coils with Different Critical Currents in 30-T Superconducting Magnets

Study on demagnetization behaviour of no-insulation (NI) persistent-current mode (PCM) HTS coil under external AC fields by 3D FEM simulation

Magnetization of the Joint-Free High Temperature Superconductor (re)ba2cu3ox Coil by Field Cooling

Mechanical Responses of a Semi-Open Split Nb–Ti Superconducting Magnet Reinforced with Cantilever Structure

Test of an 8.66-T REBCO Insert Coil with Overbanding Radial Build for a 1.3-Ghz LTS/HTS NMR Magnet

A Coupled Electromagnetic-Mechanical Model and Contact Behavior of the Superconducting Coils

26.86-tesla direct-current magnetic field generated with an all-REBCO superconducting magnet

A newly developed 10kA-level HTS conductor: innovative tenon-mortise-based modularized conductor (TMMC) based on China ancient architecture

The Design and Winding Method of A Conduction-Cooled 1.5 T Bi-2223 High Temperature Superconducting Magnet

Insert Magnet and Shim Coils Design for a 27 T Nuclear Magnetic Resonance Spectrometer with Hybrid High and Low Temperature Superconductors

Fabrication and Test of Nb3Sn-NbTi Superconducting Joint for a 14-T MRI Magnet

Electromagnetic Design of 1.5 T No-Insulation REBCO Coil System Charged by Multiflux Pumps for Dedicated MRI

Superconducting Joint and Persistent Current Switch for a 7-T Animal MRI Magnet

Electromagnetic Design and Mechanical Behavior Analysis of an 850 MHz All REBCO Nuclear Magnetic Resonance Magnet

Analysis of Charging Characteristics of a 500 MHz HTS-LTS Series NMR Magnet with an Intra-Layer No-Insulation HTS Layer-Wound Coil Structure

A Generalized Model of HTS-HTS Joint Resistance for Superconducting Magnets