Abstract:Highlights • Superconducting joints using carbon-doped multifilament MgB 2 wires were fabricated. • The joints showed a magnetic field screening effect up to 0.5 T at 20 K. • An SEM image of the cross-section of the joint showed a defect-free interface. • Serial sectioning revealed the formation of space or void at the interface. The development of superconducting joining technology for reacted magnesium diboride (MgB 2 ) conductors remains a critical challenge for the advancement of cryogen-free MgB 2 -based magnets for magnetic resonance imaging (MRI). Herein, the fabrication of superconducting joints using reacted carbon-doped multifilament MgB 2 wires for MRI magnets is reported. To achieve successful superconducting joints, the powder-in-mold method was employed, which involved tuning the filament protection mechanism, the powder compaction pressure, and the heat treatment condition. The fabricated joints demonstrated clear superconducting-to-normal transitions in self-field, with effective magnetic field screening up to 0.5 T at 20 K. To evaluate the interface between one of the MgB 2 filaments and the MgB 2 bulk within the joint, serial sectioning was conducted for the first time in this type of superconducting joint. The serial sectioning revealed space formation at the interface, potentially caused by the volume shrinkage associated with the MgB 2 formation or the combined effect of the volume shrinkage and the different thermal expansion coefficients of the MgB 2 bulk, the filament, the mold, and the sealing material. These findings are expected to be pivotal in developing MgB 2 superconducting joining technology for MRI magnet applications through interface engineering.

Fabrication and Test of Nb3Sn-NbTi Superconducting Joint for a 14-T MRI Magnet

Fabrication of Nbti Superconducting Joint by Electromagnetic Forming Method

Fabrication of NbTi Superconducting Joints for 400-Mhz NMR Application

Development of Electromagnetic Forming Nbti Superconducting Joint

Evaluation of Nbti Superconducting Joints for 400 Mhz Nmr Magnet

Superconducting Joint and Persistent Current Switch for a 7-T Animal MRI Magnet

Systematic Investigation of a NbTi-Bi2223 Hybrid Low-Resistive Joint

Superconducting joint of REBCO wires for MRI magnet

Superconducting joints using reacted multifilament MgB 2 wires: A technology toward cryogen-free MRI magnets

Fabrication and Performance of Nb3Sn Superconducting Joints

Development of persistent joints for superconducting Bi-2212 coils

Development of a persistent superconducting joint between Bi-2212/Ag-alloy multifilamentary round wires

Fabrication of A 10 Tesla Cryogen-Free Superconducting Magnet

Contact Resistance Properties of Cold-Pressing Superconducting Joints

Development Of Nb3sn Superconducting Coil Manufacture Technology

Performance Investigation of a New Developed High-Jc Nb3Sn Superconducting Strand

A Superconducting Magnet with Center Field of 10 T and Φ100 Mm Warm Bore

Manufacture and Test of a Prototype Nb3Sn-NbTi Joint Sample for the CFETR Central Solenoid Model Coil

Preliminary Mechanical Analysis of a 9.4-T Whole-Body MRI Magnet

Preparation and Properties of NbTi–Nb 3 Sn–NbTi Superconducting Joints

High critical current joint of MgB2 tapes using Mg and B powder mixture as flux