Abstract:Nowadays the development of high-field magnets strongly relies on the performance of superconducting materials. Iron-based superconductors exhibit high upper critical fields and low electromagnetic anisotropy, making them particularly attractive for high-field applications, especially in particle accelerator magnets, nuclear magnetic resonance spectrometers, medical magnetic resonance imaging systems and nuclear fusion reactors. Herein, through an industrially scalable and cost-effective manufacturing strategy, a practical level critical current density up to 1.1x10^5 A/cm2 at 4.2 K in an external magnetic field of 10 T was achieved in Cu/Ag composite sheathed Ba0.6K0.4Fe2As2 superconducting tapes. The preparation strategy combines flat rolling to induce grain texture and a subsequent hot-isostatic-pressing densification. By varying the parameters of rolling, the degree of grain texture was engineered. It is found that the transport properties of the Ba1-xKxFe2As2 tapes can be enhanced by applying a large amount of deformation during rolling, which can be attributed to the improved degree of c-axis texture. Microstructure characterizations on the highest-performance tape demonstrate that the Ba1-xKxFe2As2 phase has a uniform element distribution and small grains with good connectivity. Grain boundary pinning is consequently enhanced as proved by large currents circulating through the sample even at 25 K. Our work proves that Cu/Ag composite sheathed Ba1-xKxFe2As2 superconducting tapes can be a promising competitor for practical high-field applications in terms of the viable, scalable and cost-effective fabrication strategy applied and the high transport properties achieved in this work.

Fabrication of Bi-2223 High Temperature Superconducting Magnet

The Design and Winding Method of A Conduction-Cooled 1.5 T Bi-2223 High Temperature Superconducting Magnet

Development of YBCO Insert for a 25 T All Superconducting Magnet

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

The Optimal Design of a 300~MJ Superconducting Magnet Using HTS Tapes

The Optimal Design Of A 300mj Superconducting Magnet Using Hts Tapes

Mechanical characteristics of Bi-2223 tape with a low matrix ratio

Fabrication of Bi-2223 Superconducting Thick Films Via A Non-Vacuum Method on Silver Foil Substrates

Fabrication of Bi-System High Temperature Superconducting Powder

High Temperature Superconducting YBCO Insert for 25 T Full Superconducting Magnet

High Temperature Superconducting Magnet for Fast Discharging Experiments

Fabrication of Nbti Superconducting Joint by Electromagnetic Forming Method

Fabrication and Characterization of Ni-clad Bi-2223/Ag Superconducting Tapes

Development of persistent joints for superconducting Bi-2212 coils

Double-Spiral Current Leads of Bi-2223 Tapes for A Smes Magnet

Development of a persistent superconducting joint between Bi-2212/Ag-alloy multifilamentary round wires

First performance test of a 25 T cryogen-free superconducting magnet

Fabrication and Test of Nb3Sn-NbTi Superconducting Joint for a 14-T MRI Magnet

High-performance Ba1-xKxFe2As2 superconducting tapes with grain texture engineered via a scalable and cost-effective fabrication

Conceptual Design of a HTS CICC Coil for Fusion Devices based on Bi-2223 Tapes

Measurement and Calculation of Residual Magnetic Field in a Bi2223/Ag Magnet