Abstract:A higher available magnetic field can give more flexibility for significant research and constructions. Inserting feasible high-temperature-superconducting (HTS) magnet inside low-temperature-superconducting (LTS) external is becoming an efficient method to build ultra-high-field (UHF) magnets. However, HTS insert magnets exhibited concentration of magnetic strain during the energization, significantly owing to the screening-current effect. This phenomenon affect the structural integrity of HTS magnets, posing a difficulty for UHF magnets to reach a center field larger than 30 T. In this paper, we report the recent progress of the 35 T all-superconducting UHF magnet project. The full-cycle development of this homemade UHF magnet was a strong collaboration with multiple domestic institutions in China. We used commercial REBa2Cu3O7-x (RE = rare earth element, REBCO) conductors to wind the 20 T HTS insert. Specifically, we optimized the electromagnetic design of this HTS insert with consideration of screening-current induced strain. We applied the no-insulation and metal-as-insulation winding techniques simultaneously to balance the time constant of the two nested REBCO coils. During the excitation test, the HTS insert maintained a 256 A operation current as designed for nearly 18 hours. With the energization of LTS external magnet, the entire facility reached a center field larger than 20 T for 16 hours, 30 T for 6.35 hours and 32 T for 2 hours. It finally reached a 32.4 T center field, at which point the LTS external quenched, inducing the HTS insert to quench as well. After quench, the HTS magnet can maintained 229 A operation current during the postmortem standalone test. This 32.4 T result exhibits effectiveness of considering the screening-current induced strain to enhance the structural integrity of REBCO magnets, and verifies the high reliability of REBCO magnets by generating a long-duration high field environment without any quench accident originating from the REBCO magnet.

Screening Current Behaviors of an Intra-Layer No-Insulation Magnet in Self Field and Background Field

Passive Shimming of A Superconducting Magnet Using the L-1-Norm Regularized Least Square Algorithm

Screening current in ultra-high-field non-insulated superconducting magnets

Designs and Tests of Shaking Coils to Reduce Screening Currents Induced in HTS Insert Coils for NMR Magnet

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Magnetization and screening current in an 800-MHz (18.8-T) REBCO NMR insert magnet: experimental results and numerical analysis

Effect of local and global screening current on the current decay in closed-loop HTS coils

An Advanced Computational Approach for Evaluating Screening-Current-Induced Strain in REBCO HTS Coils Considering Electromagnetic-Mechanical Coupling

Numerical Study of the Electromagnetic-Thermal Characteristics During the Charging Process of Ultra-high Field HTS Insert Magnet

Study on demagnetization behaviour of no-insulation (NI) persistent-current mode (PCM) HTS coil under external AC fields by 3D FEM simulation

Numerical Analysis of Screening-Current Induced Strain in a 16 T REBCO Insert Within a 20 T Background Field

A Real-time Monitoring System for Investigating Electromagnetic Behaviors of An HTS Coil

Three-dimensional simulation of the coupled electromagnetic-mechanical responses in a no-insulation racetrack coil

Strain analysis and preliminary test of an all-superconducting high-field magnet generating 32.4 T direct-current magnetic field

Screening current effect on the stress and strain distribution in REBCO high-field magnets: experimental verification and numerical analysis

Operation of Prototype Race-Track Closed-Loop HTS Coil with Metal-as-Insulation in Solid Nitrogen

Modeling of the Stacked High-Temperature Superconducting Cable-in-Conduit Conductor for High-Field Magnet Applications

A Novel REBCO Conductor Design to Reduce Screening-Current Field in REBCO Magnets

Conceptual Design of 3-T all HTS MRI Using No-Insulation Winding Technology: Main Split Coil-System and its Active Shield

Screening current induced magnetic field and stress in ultra-high-field magnets using REBCO coated conductors

Multiscale modelling on the multi-physical behaviors of high temperature superconducting magnets based on a combined global homogenization and local refinement scheme