Abstract:The no-insulation (NI) high-temperature superconductor (HTS) winding technique enables the fabrication of highly compact magnets with self-quench protection. NI pancake coils are implemented to develop a 28-T HTS magnet for the operation of a 792-GHz gyrotron, which is a microwave source for dynamic nuclear polarization nuclear magnetic resonance. To this end, three NI all-GdBCO double pancake (DP) magnets were fabricated using different winding diameters and procedures. The objective was to explore different mechanical coil protection mechanisms at high magnetic fields, including clamping, overband, and solder impregnation. Experiments in liquid helium using magnets with winding diameters of 18, 25, and 66 mm yielded a center field of 14.4, 11.2, and 8.1 T, respectively. The maximum currents applied to the DP magnets ranged from 780 to 1000 A. Both the 18 and 66 mm DP coils contained 400 m (2 × 200 m) HTS tape, while the 25 mm seamless DP coil consisted of only one continuous 200 m HTS tape. The 25 mm magnet with solder impregnation showed the best repeatability, although the current density was reduced owing to the solder thickness between the coil windings. Critical to the implementation of such coils in liquid helium is to effectively transfer high currents to the magnet, while not compromising the helium boil-off. Furthermore, the design of hybrid copper-HTS current leads capable of carrying current larger than 1000 A from room temperature to the HTS magnet at 4.2 K is presented. The implementation of liquid nitrogen-cooled hybrid copper-HTS current leads reduced the helium boil-off and permitted independent temperature control of the current leads.

Designs and Tests of Shaking Coils to Reduce Screening Currents Induced in HTS Insert Coils for NMR Magnet

Design and Test Performance of 2g Pancake Coils for Hts Dc Induction Heater Prototype

Development of a Conduction-Cooled HTS SMES

Screening Current Behaviors of an Intra-Layer No-Insulation Magnet in Self Field and Background Field

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

A Real-time Monitoring System for Investigating Electromagnetic Behaviors of An HTS Coil

Electromagnetic Design of HTS D-shaped Coils for a Toroidal-type Superconducting Magnet

A quench detection method for parallel co-wound HTS coils based on current redistribution

The Optimal Design of a 300~MJ Superconducting Magnet Using HTS Tapes

Detection and Analysis of Fault for HTS AMDT Cores by Magnetostriction-Induced Vibration

A Quench detection method for closed-loop superconducting coils based on currents redistribution in co-windings

The Optimal Design Of A 300mj Superconducting Magnet Using Hts Tapes

Fabrication Procedures and Mechanical Supports of No-Insulation All-GdBCO Double Pancake Magnets in Liquid Helium

Two Quenched Models for High-Temperature Superconducting Insulated Coils

Operation of Prototype Race-Track Closed-Loop HTS Coil with Metal-as-Insulation in Solid Nitrogen

A Novel REBCO Conductor Design to Reduce Screening-Current Field in REBCO Magnets

Test and Analysis of Electromagnetic and Mechanical Properties of HTS Coil During Quench State

An Advanced Computational Approach for Evaluating Screening-Current-Induced Strain in REBCO HTS Coils Considering Electromagnetic-Mechanical Coupling

Highly Efficient Liquid Hydrogen Storage System by Magnetic Levitation Using HTS Coils

A customized electric heater to mitigate screening current by optimal control on temperature distribution in a high-temperature superconductor coil

Screening current in ultra-high-field non-insulated superconducting magnets