Abstract:Despite the excellent improvements in high fields resulting from the adoption of REBa2Cu3O x (REBCO)-coated conductors (CCs), the resulting stress and strain due to winding tension, cooling stress, and the screening-current-induced Lorentz force may lead to severe plastic deformation and degradation of superconductivity. Therefore, it is essential to understand the comprehensive electromechanical behavior and deformation mechanism of high-field REBCO magnets. In this paper, multistep finite element analysis is designed to simulate the electromechanical behavior of REBCO coils after the winding, coolingdown, and charging processes. All major constituent materials including the mandrel, CCs, cowinding reinforcement, and over-banding are considered in the mechanical models to emulate contact–separation behavior between them. In addition to contact nonlinearity, an intrinsic elastoplastic property is introduced to predict the plastic deformation observed in experiments. To reveal the screening-current effect, the distributions of the screening current and the magnetic field are analyzed by solving the T-A formulation of Maxwell’s equations using a homogeneous technique. Then, with the electromagnetic load acting as a body force, the electromagnetic stress and strain are computed and experimentally validated for a pancake coil, including the transport current and external field. Finally, the electromechanical behavior under a Lorentz load is investigated by considering the accumulation of stress and strain due to winding tension and cooling down. The simulation results reveal that the winding tension and thermal stress affect the final stressstates in the fully charged state and therefore the electromechanical properties. Both plastic deformation and possible degradation are more likely to occur in the outermost tape of several pancakes due to the influence of screening-current-induced stress and strain. In addition, this work further analyzes the effect of the current sweep reversal method, which could be favorable in reducing the screening-current-induced high stress and strain in the steady state.

The Research on No-Insulation ReBCO Racetrack Coil

Investigation of the Effect of Non-Uniform Stress Distribution on the Transient Electromagnetic Behavior of a No-Insulation Rebco Racetrack Coil

A Numerical Method for Transient Thermal Analysis of No-Insulation REBCO Pancake Coils with Several Resistive Joints

Sudden Discharging and Overcurrent Simulations of REBCO Coils Coated With Conductive Epoxy Resin

Design and Preliminary Tests of a 20-T REBCO Insert Coil for a 35-T All Superconducting Magnet

Electromagnetic and Thermal Analysis of an Intra-layer No-Insulation Coil During Quench

Ramping Loss and Mechanical Response in a No-Insulation High-Temperature Superconducting Layer-Wound Coil and Intra-Layers No-Insulation Coil

Experiment and Numerical Modeling of Current Distributions Inside REBCO Tapes of No-Insulation Superconducting Magnet Coils Under Time-Varying Fields

Investigation On Performance Of No-Insulation Coil Considering The Influence Of Stress Distribution On Radial Characteristic Resistivity

Experimental study to investigate magnetic field and winding force-dependent contact resistance of NI REBCO coil

Analysis of Charging and Sudden-Discharging Characteristics of No-Insulation REBCO Coil Using an Electromagnetic Coupling Model

Three-dimensional simulation of the coupled electromagnetic-mechanical responses in a no-insulation racetrack coil

Numerical Analysis of the Electromechanical Behavior of High-Field REBCO Coils in All-Superconducting Magnets

Design, Fabrication, and Testing of a YBCO Racetrack Coil for an HTS Synchronous Motor with HTS Flux Pump

Numerical Study on Thermal Stability of No-Insulation Coils Using a Three-Dimensional Finite-Element Model

Research on the Evolution Characteristics of REBCO Inductance for 19 T All-Superconducting Magnet

Fabrication of Racetrack-Type Double-Pancake Coils Using 2g Tapes and Online Mechanical Shock Test

Progress in the Construction of a 20 T REBCO Insert Coil for High-Field All-Superconducting Magnets

Numerical Analysis of Thermal Stability and Mechanical Response in a No-Insulation High-Temperature Superconducting Layer-Wound Coil

Development of a Bi-2212 Solenoid Insert Coil in a 12 T Superconducting Magnet

Experimental Study on A Nb3al Insert Coil under High Magnetic Field