Abstract:Despite the excellent improvements in high fields resulting from the adoption of REBa2Cu3O x (REBCO)-coated conductors (CCs), the resulting stress and strain due to winding tension, cooling stress, and the screening-current-induced Lorentz force may lead to severe plastic deformation and degradation of superconductivity. Therefore, it is essential to understand the comprehensive electromechanical behavior and deformation mechanism of high-field REBCO magnets. In this paper, multistep finite element analysis is designed to simulate the electromechanical behavior of REBCO coils after the winding, coolingdown, and charging processes. All major constituent materials including the mandrel, CCs, cowinding reinforcement, and over-banding are considered in the mechanical models to emulate contact–separation behavior between them. In addition to contact nonlinearity, an intrinsic elastoplastic property is introduced to predict the plastic deformation observed in experiments. To reveal the screening-current effect, the distributions of the screening current and the magnetic field are analyzed by solving the T-A formulation of Maxwell’s equations using a homogeneous technique. Then, with the electromagnetic load acting as a body force, the electromagnetic stress and strain are computed and experimentally validated for a pancake coil, including the transport current and external field. Finally, the electromechanical behavior under a Lorentz load is investigated by considering the accumulation of stress and strain due to winding tension and cooling down. The simulation results reveal that the winding tension and thermal stress affect the final stressstates in the fully charged state and therefore the electromechanical properties. Both plastic deformation and possible degradation are more likely to occur in the outermost tape of several pancakes due to the influence of screening-current-induced stress and strain. In addition, this work further analyzes the effect of the current sweep reversal method, which could be favorable in reducing the screening-current-induced high stress and strain in the steady state.

Acceptance Tests of REBCO Wires for Field Coil of 10 kW High-Temperature Superconducting Generator Cooled by Liquid Hydrogen

Critical Current Measurement of REBCO Cables by Using a Superconducting Transformer

Experiment and Simulation of Rebco Conductor Coils for an Hts Linear Synchronous Motor

The Research on No-Insulation ReBCO Racetrack Coil

Performance Test of REBCO CICC Sub-Cables with 10 Ka Current under 20 T Background Field

AC Loss and Contact Resistance in Highly Flexible Rebco Cable for Fusion Applications

Sudden Discharging and Overcurrent Simulations of REBCO Coils Coated With Conductive Epoxy Resin

Critical Current Correlations and Regressions Across the Superconducting Parameter Space of REBCO Wires, B||c

Experimental Studies of Critical Currents and Joint Resistance of HTS Twisted Stack Slotted-Core Cables

RETRACTED: Development of a Cryogenic Test Bed for High Amperage Critical Current Measurement on High Temperature Superconductor Wire

Quench Characteristics Comparison Between Solid Nitrogen and Conduction Cooled REBCO Coil under Thermal Disturbance and over Current Pulse

The Performance of First CORC Cable Solenoid Insert for Development of CFETR High-Field Magnet

A Novel REBCO Conductor Design to Reduce Screening-Current Field in REBCO Magnets

Magnetic Field and Temperature Scaling of the Critical Current of REBCO Tapes

Numerical Analysis of the Electromechanical Behavior of High-Field REBCO Coils in All-Superconducting Magnets

Measurement of AC loss down to 25 K in a REBCO racetrack coil for electrical aircraft motor

Performance study of REBCO multi-filament tapes/ CORC cables prepared by reel-to-reel mechanical incision

Superconducting joint of REBCO wires for MRI magnet

Over-Current Simulation Test for High Temperature Superconducting Generator

Manufacture and Testing of Pre-prototype HTS Twisted Stack Slotted-Core Cable

Electromechanical behaviour of REBCO coated conductor toroidal field coils for ultra-high-field magnetic-confinement plasma devices