Abstract:Both the pancake coiling and conductor on round core (CORC) cabling processes consist of winding second-generation high-temperature superconducting tape (REBCO) in a core. The contact behavior between the tape and the core during the winding process directly affects the critical current, cable flexibility, mechanical support and electrical contact resistance. Therefore, the winding process needs to be optimized to produce pancake coils and CORC cables with the desired electrical and mechanical properties. This paper comprehensively considers the role of the relaxation and Poisson effects. The theoretical model and the finite element model (FEM) for calculating the contact stress during the winding process are established, and a formula for the estimation of the contact force is proposed. The suitable winding pre-tension force, winding curvature radius of SCS2030 (2 mm width and 30 μ m substrate thickness) and SCS4050 (4 mm width and 50 μ m substrate thickness) of REBCO tapes are obtained and discussed by accounting for the relaxation effect and the critical current degradation limit. With consideration of the Poisson effect, the nonlinear contact behavior is investigated. In addition, the relaxation effect, Poisson effect and plasticity of the REBCO tape are taken into account in the FEM model. The results show that the axial strain in the REBCO layer during the winding process is related to the contact behavior. The greater the winding pre-tension force, the smaller the helical curvature radius, and the greater the contact force. The distribution of contact stress for several winding factors (winding pre-tension force, winding angle and the core radius) is divided into three contact types: the single-line contact, the double-line contact and the surface contact. The FEM model results are consistent with the theoretical evaluation and are more suitable for practical winding cases. This research is the basis for designing and optimizing pancake coils and CORC cables.

Design and Test of a Double Pancake Coil for SMES Application Wound by HTS Roebel Cable

Design and Test Performance of 2g Pancake Coils for Hts Dc Induction Heater Prototype

Development of a Conduction-Cooled HTS SMES

Experimental and Numerical Study on the Magnetization Process of Roebel Cable Segments

Manufacture and Testing of Pre-prototype HTS Twisted Stack Slotted-Core Cable

Experimental Investigation Of A High Temperature Superconducting Pancake Consisted Of The Rebco Composite Cable For Superconducting Magnetic Energy Storage System

Experimental Studies of Critical Currents and Joint Resistance of HTS Twisted Stack Slotted-Core Cables

Conceptual Design and Optimisation of HTS Roebel Tapes

Winding Design for CFETR Central Solenoid Model Coil

The Electric Characteristics of HTS Double-Pancake Coil with AC Pulse over Currents

Persistent-Current Switch for Pancake Coils of Rare Earth-Barium-Copper-Oxide High-Temperature Superconductor: Design and Test Results of A Double-Pancake Coil Operated in Liquid Nitrogen (77-65 K) and in Solid Nitrogen (60-57 K)

Nonlinear Contact Behavior of HTS Tapes During Pancake Coiling and CORC Cabling

Structural Design and Mechanical Analysis of HTS CICC Made From Twisted Stack Slotted-Core Cable

Performance Test of REBCO CICC Sub-Cables with 10 Ka Current under 20 T Background Field

Bending Characteristics of a Transposed Cable (xcable) with In-Plane Bending of REBCO Tapes

Design and Preliminary Tests of a 20-T REBCO Insert Coil for a 35-T All Superconducting Magnet

Development of a 400 M YBCO Racetrack Coil for HTS Machine Applications

Winding and Testing of YBCO Coils Using Different HTS Wires

Development of a novel transposed cable with in-plane bending of HTS tapes (X-cable)

Winding R&D for CFETR Central Solenoid Model Coil

Mechanical Behavior and Critical Current Density Variation of the Twisted Stacked-Tape Slotted-Core Cable-in-conduit Conductor under Bending and Axial Tensile Load