Abstract:The Chinese Fusion Engineering Test Reactor (CFETR) is designed to build a fusion engineering Tokamak reactor generating fusion power of 200-1500 MW, and to test the breeding tritium during fusion reaction. This may require a maximum magnetic field up to 15 T in the central solenoid and toroidal field coils. New superconducting materials should be developed for satisfying the next-generation fusion reactors with critical requirements. Recently, Bi2Sr2CaCu2Ox(denoted as Bi-2212) is considered as one of the most promising potential superconductors to be used as the magnets in CFETR, however, they will be subjected to harsh irradiation under operating conditions. The irradiation effects of the high-energy helium ions on the Ag-sheathed Bi-2212 superconducting round wire have been explored for the first time in this work. The microstructure and the critical current at 4.2 K of the superconducting wire before and after irradiation have been carefully investigated. Room-temperature x-ray diffraction (XRD) profiles showed that all the peaks shifted rightward significantly with a broadened (111)(Ag)peak, indicating that the high-energy He(+)irradiation resulted in appreciable defects and strain in the superconducting wire. Meanwhile, thein-situhigh-temperature XRD tests showed that the lattice constant and the thermal expansion coefficient were deduced in the irradiated sample to be due to the presence of the generated defects. After irradiation, the grain size of the Ag sheath was refined, and the lattice of Bi-2212 superconductor was distorted obviously, as confirmed by transmission electronic microscopy. The critical current I(C)at 4.2 K of the superconducting wires in the field of 0-12T determined by the four-probe technique, decreased substantially after irradiation because of the lattice distortion and the consequently induced strain in the Bi-2212 superconductor. This work provides a solid basis for evaluating and understanding the irradiation effects upon the Ag-sheathed Bi-2212 superconducting wire, more promising for future application in CFETR.

R&D on glass fiber reinforced epoxy resin composites for superconducting Tokamak

Fabrication of Three-dimensional Thermally Conductive Carbon Fibers/Carbon Nanotubes Network Reinforce Epoxy Composites

Research on Insulation Technology for Nb3Sn Layer Coil of Superconducting Conductor Testing Facility

Manufacturing and testing of high-strength low-temperature composite insulator

Preliminary R&D on Flat-Type W/Cu Plasma-Facing Materials and Components for Experimental Advanced Superconducting Tokamak

Design and Development of Turn Insulation Automatic Wrapping System for CRAFT TF

Mechanical and Thermal Characteristics of Insulation Materials for the KSTAR Magnet System at Cryogenic Temperature

Numerical Study on Effective Thermal Conductivity of the Compacted Superconducting Magnet

R&D activities of the superconducting Tokamak project

Composite Carbon–Epoxy Tubes for Space Structures: Ground Vacuum Radiant Experiments and Structural Behavior Analysis

Investigation of real-time strain responses of the insulating system of superconducting magnets by using fiber Bragg grating sensors

Thermal Conductivity Measurement of the Epoxies and Composite Material for Low Temperature Superconducting Magnet Design

High Temperature Baking Test and Study on Axial Insulation Breaks

Development and Qualification of ITER Current Lead Electrical Insulation

Performance research of the high quality helium tight composite insulators

Thermal degradation analysis and optimization of controlled heat treatment for stacked high temperature superconducting tapes

Study on VPI Process of Epoxy Impregnating Resin for Cryogenic Superconducting Magnets in TOKAMAK

R&D of 19 Kv Class Splicing Device to Connect High-Voltage Instrumentation Wires and Cable

Design and Analysis of High Temperature Superconducting Current Leads for CRAFT TF Magnet

Effective modulus of cables for super-conducting toroidal field (TF) coils of HT-7U tokamak device

Evaluation of Irradiation Effects on the Microstructure and Properties of Ag-sheathed Bi-2212 Superconducting Round Wire for Future Application in CFETR