Abstract:Side-pumping fibre combiners offer several advantages in fibre laser design, including distributed pump absorption, reduced heat load, and improved flexibility and reliability. These benefits are particularly important for all-fibre lasers and amplifiers operating in the mid-IR wavelength range and based on soft-glass optical fibres. However, conventional fabrication methods face limitations due to significant differences in the thermal properties of pump-delivering silica fibres and signal-guiding fluoride-based fibres. To address these challenges, this work introduces a design for a fuse-less side-polished (D-shaped) fibre-based pump combiner comprising multimode silica and double-clad fluoride-based fibres. The results demonstrate stable coupling efficiency exceeding 80% at a 980-nm wavelength over 8 hours of continuous operation under active thermal control. The developed pump combiner has also been successfully integrated into a linear Er-doped fibre laser cavity, showing continuous-wave generation at 2731 or 2781-nm central wavelength with an output power of 0.87 W. Overall, this innovative approach presents a simple, repeatable, and reproducible pump combiner design that opens up new possibilities for leveraging fibre-based component technology in soft glass matrices and other emerging fibres with unique compositions.

End-pump silica-fluoride fiber combiner utilizing tapering and assembling technique for mid-infrared laser systems

Side-polished Silica-Fluoride Multimode Fibre Pump Combiner for Mid-IR Fibre Lasers and Amplifiers

A Simple Approach to Fiber-Based Tunable Microcavity with High Coupling Efficiency

High power mid-infrared side-pump combiner with good thermal stability based on the point-by-point fusion splicing technique

Research on Multi-Kilowatts Level Tapered Fiber Bundle N×1 Pumping Combiner for High Power Fiber Laser

Design and fabrication of >20 KW 5 × 1 pump combiner with high efficiency

Fabrication of a tellurite-fiber-based side-pump coupler based on the tapered-fused method

Fusion Splicing Soft Glass Microfibers for Photonic Devices

Fused angle-polished multi-points side-pumping coupler for monolithic fiber lasers and amplifiers

Pump-Signal Combiner With Large-Core Signal Fiber Feed-Through For Fiber Lasers And Amplifiers

Novel 3 × 1 signal combiner with high-power fiber laser output of high beam quality

Design of Fiber Coupling System for High Brightness Semiconductor Laser Pump Source

High power signal combiner for fiber lasers

Tapered Fused Fiber Bundle Coupler Capable of 1 Kw Laser Combining and 300 W Laser Splitting

Fused Side-Coupler for Double-Clad Fiber Lasers

A Non-Fused Fiber Coupler for Side-Pumping of Double-Clad Fiber Lasers

A Side-Pump Coupler With Refractive Index Valley Configuration for Fiber Lasers and Amplifiers

Low-loss, robust fusion splicing of silica to chalcogenide fiber for integrated mid-infrared laser technology development

100 Μm Core Diameter Monolithic Fiber Side-Pumping Coupler for 10 Mj 10 Ns All-Fiber Laser

Numerical Modeling and Optimization of Mid-Infrared Fluoride Glass Raman Fiber Lasers Pumped by $\hbox{tm}^{3+}$ -Doped Fiber Laser

High–Power 792 nm Fiber–Coupled Semiconductor Laser