Abstract:The all-fiber signal combiner based on incoherent beam combination is the key component to realize the power amplification of fiber laser. At present, the all-fiber combiner is generally fabricated by splicing a tapered fused fiber bundle with an output fiber. During the tapering process, the size of the cladding and core of the input fiber will become smaller at the same time, which will inevitably cause the core mode to change to the cladding mode. To reduce the degree of taper, the method of hydrofluoric acid corrosion is generally used to remove part of the cladding of the input fiber to make the diameter of the optical fiber smaller. Even so, the tapering process is still unavoidable. Therefore, we have proposed a new manufacturing method for the all-fiber signal combiner. This method uses a CO2 laser to ablate part of the cladding of the input optical fiber to produce a D-shaped fiber. Then, the planes of the two D-shaped optical fibers are pressed tightly and then heated to get fused. Finally, the Dshaped fiber pair is cut and spliced with an output fiber to form an all-fiber combiner. This novel method avoids the tapering process and hardly changes the core size of the input fiber. The relationship between the core distance of the input fiber and the beam quality of the signal combiner manufacturing by the new method is studied by the finite-difference beam propagation method. We also compared the combining ability and beam quality of the combiner made based on the D-shaped fiber and that made by the tapered fiber bundle. Both the simulation and experimental results showed that the beam quality of the combiner made based on the D-shaped fiber was better than that made by the traditional method.

Fused taper technique for fiber coupling applications

Filament Fusion of Hollow-Core Photonic Crystal Fiber and Single Mode Fiber: Numerical Simulation and Experimental Analysis

Novel fiber taper for efficient optical interconnection

Experimental Study on Fused Tapered Optical Fibre Coupler

Theoretical Analysis of Fused Tapered Side-Pumping Combiner for All-Fiber Lasers and Amplifiers

An Multi-to-single Mode Conversion Experiment Using the Tapered Fiber

The Influence of Fused Depth on the Side-Pumping Combiner for All-Fiber Lasers and Amplifiers

Taper-fused Side Pump Combiner for All-Fiber Lasers and Amplifiers: A Review

Fabrication and Testing of Fusion Tapered Fiber Optic Coupler

Double-end low-loss coupling of anti-resonant hollow-core fibers with solid-core single-mode fibers by tapering technique

A Fused Side-Pumping Optical Fiber Coupler Based on Twisting

A Design of Optical Fiber Microcoupler with Laser-Fused Biconical Tapers

Power Conversion Efficiency of Tapered Fiber

Coupling and Fusion Splicing of Photonic Crystal Fibers with Conventional Fibers

Enhanced Spatial Light Coupling Efficiency of Polymer Optical Fiber via Micro-lens Self-heating Melting Technique

Tapered Fused Fiber Bundle Coupler Capable of 1 Kw Laser Combining and 300 W Laser Splitting

Large-tolerance Fiber Coupling Technology

High power signal combiner for fiber lasers

Fabrication of 2 × 1 Signal Combiner for High Power Lasers Based on D-shaped Fiber Pair

Fusion Splicing of Double-Clad Specialty Fiber Using Active Alignment Technology

Study of Single-mode Fused Biconical Optical Coupler Based on Strong Coupled-mode Theory