Abstract:Side-pumping fibre combiners offer several advantages in fibre laser design, including distributed pump absorption, reduced heat load, and improved flexibility and reliability. These benefits are particularly important for all-fibre lasers and amplifiers operating in the mid-IR wavelength range and based on soft-glass optical fibres. However, conventional fabrication methods face limitations due to significant differences in the thermal properties of pump-delivering silica fibres and signal-guiding fluoride-based fibres. To address these challenges, this work introduces a design for a fuse-less side-polished (D-shaped) fibre-based pump combiner comprising multimode silica and double-clad fluoride-based fibres. The results demonstrate stable coupling efficiency exceeding 80% at a 980-nm wavelength over 8 hours of continuous operation under active thermal control. The developed pump combiner has also been successfully integrated into a linear Er-doped fibre laser cavity, showing continuous-wave generation at 2731 or 2781-nm central wavelength with an output power of 0.87 W. Overall, this innovative approach presents a simple, repeatable, and reproducible pump combiner design that opens up new possibilities for leveraging fibre-based component technology in soft glass matrices and other emerging fibres with unique compositions.

Fused Side-Coupler for Double-Clad Fiber Lasers

Fused side-coupler for double-clad fiber lasers with CO_2 laser

Side-pumping Coupler Technology for Double-Clad Fiber

Fused angle-polished multi-points side-pumping coupler for monolithic fiber lasers and amplifiers

Multi-coupler Side-Pumped Yb-doped Double-Clad Fiber Laser

High Pulse Repetition Frequency Fiber-Coupled Laser-Diode Module

Side-Pumped Yb-Doped Double-Clad Fiber Laser

100 Μm Core Diameter Monolithic Fiber Side-Pumping Coupler for 10 Mj 10 Ns All-Fiber Laser

Tapered Fused Fiber Bundle Coupler Capable of 1 Kw Laser Combining and 300 W Laser Splitting

A Side-Pump Coupler With Refractive Index Valley Configuration for Fiber Lasers and Amplifiers

Study on design of high-power fiber fused components

Fiber coupler for mode selection and high-efficiency pump coupling.

End-pump silica-fluoride fiber combiner utilizing tapering and assembling technique for mid-infrared laser systems

Studies of pump light leakage out of couplers for multi-coupler side-pumped Yb-doped double-clad fiber lasers

High coupling efficiency and low signal light loss (2 + 1) × 1 coupler

Multi-Coupler Side-Pumped Yb-Doped Double-Clad Fibre Laser and Pump Light Leakage at Coupler

Side-polished Silica-Fluoride Multimode Fibre Pump Combiner for Mid-IR Fibre Lasers and Amplifiers

High power mid-infrared side-pump combiner with good thermal stability based on the point-by-point fusion splicing technique

Fabrication of a tellurite-fiber-based side-pump coupler based on the tapered-fused method

Fusion Splicing of Double-Clad Specialty Fiber Using Active Alignment Technology

Investigation of a twisting-fused side-pump coupler based on tellurite fiber