Abstract:Fiber pump lasers are widely used in a variety of fields, such as optical fiber communication, national defense, and medical beauty due to their high beam quality and intense laser energy. However, the alignment errors of optical parameters can influence the beam quality in the packaging of the fiber pump lasers. It is necessary to analyze the reflector, focusing lens, fiber, and the laser diode on the coupling influence between for guiding the fiber pump laser packaging. Firstly, we establish the optical path between the laser diode, focusing lens and reflector based on the physical ray-tracing method. On the other hand, the high coupling efficiency of whole system is achieved by optimize the parameters of each optical element. The simulation result shows that the highest coupling efficiency is 98.6% based on optimizing the parameters of the optical path while the experimental result of coupling efficiency is 90.36%. Also, the effects of refractive index, wavelength and fiber diameter on coupling efficiency are further investigated. The experimental results show that the radial displacement has the greatest influence on the coupling efficiency. The simulation results show that increasing the fiber core diameter can effectively improve the coupling efficiency. The results of rigorous analysis will provide an effective reference for manufacturing compact, high coupling efficiency fiber pumped laser.

High coupling efficiency and low signal light loss (2 + 1) × 1 coupler

Pump Couplers in a Series Connection

Pump Couplers in A Cascaded Structure

A Side-Pump Coupler With Refractive Index Valley Configuration for Fiber Lasers and Amplifiers

The pump arm numbers of (N+1) x 1 couplers

Fiber coupler for mode selection and high-efficiency pump coupling.

Twin-nanofiber structure for a highly efficient single-photon collection

Comparison of Fiber-to-Waveguide Couplers in Point Diffraction Interferometer Based on Waveguide Reference Wavefront Source

Research on Multi-Kilowatts Level Tapered Fiber Bundle N×1 Pumping Combiner for High Power Fiber Laser

Tapered Fused Fiber Bundle Coupler Capable of 1 Kw Laser Combining and 300 W Laser Splitting

Fused angle-polished multi-points side-pumping coupler for monolithic fiber lasers and amplifiers

Design and fabrication of >20 KW 5 × 1 pump combiner with high efficiency

Fused Side-Coupler for Double-Clad Fiber Lasers

The coupling study between multi-channel laser diodes and multimode fiber in a fiber pump laser

100 Μm Core Diameter Monolithic Fiber Side-Pumping Coupler for 10 Mj 10 Ns All-Fiber Laser

Pump-Signal Combiner With Large-Core Signal Fiber Feed-Through For Fiber Lasers And Amplifiers

Studies of pump light leakage out of couplers for multi-coupler side-pumped Yb-doped double-clad fiber lasers

High-Efficiency Unidirectional Dual-Wavelength-Band Grating Coupler with 1D Subwavelength Structure

A Design of Optical Fiber Microcoupler with Laser-Fused Biconical Tapers

Theoretical study of pumping absorption in a co-linear side-pumping coupler

Fabrication of a tellurite-fiber-based side-pump coupler based on the tapered-fused method