Abstract:For many pump applications, it is necessary to satisfy the performance requirements in more than one operating point. The conventional single-point design method which would cause a sharp decrease in the off-design point cannot fully meet such requirement. In this paper, an approach of the pump diffuser optimization is used to satisfy the performance in two points simultaneously. The three coefficient of the quadratic polynomial which is used to control the three inlet blade angles corresponding to the hub, shroud and the stream surface between (span wise=0.5) are selected as design parameters. Head, efficiency and power of the pump in the two selected point are selected as objective functions. The objective functions in the two selected points are in relations of trade-off. Design of experiments (DOE), steady CFD simulation, response surface method (RSM), Neighborhood Cultivation Genetic Algorisms (NCGA) are used to solve this problem. The DOE theory is applied to reduce the number of tests, three-dimensional simulations are performed to predict the pump performance, the RSM (response surface method) is used to correlate the pump performance to the intermediate variable, NCGA is used to search the pareto solutions along the response surface. The multi-point design optimization method is proved effective in searching the pareto solutions to satisfy the given requirements.

The pump arm numbers of (N+1) x 1 couplers

High coupling efficiency and low signal light loss (2 + 1) × 1 coupler

Pump Couplers in a Series Connection

Pump Couplers in A Cascaded Structure

Design and fabrication of >20 KW 5 × 1 pump combiner with high efficiency

Theoretical study of pumping absorption in a co-linear side-pumping coupler

Comparison of Fiber-to-Waveguide Couplers in Point Diffraction Interferometer Based on Waveguide Reference Wavefront Source

Research on Multi-Kilowatts Level Tapered Fiber Bundle N×1 Pumping Combiner for High Power Fiber Laser

Side-pumping Coupler Technology for Double-Clad Fiber

Fused angle-polished multi-points side-pumping coupler for monolithic fiber lasers and amplifiers

Impeller design criterion based on numerical simulation of stock pump flow field and its application

A Side-Pump Coupler With Refractive Index Valley Configuration for Fiber Lasers and Amplifiers

Optimization of Bellows in Bellows Pumps for Higher Pumping Efficiency

Multi-Point Optimization on the Diffuser of an Axial Flow Pump

Power Transfer Characteristics among N Parallel Single-Mode Optical Fibers

Analysis of Power Transfer Characteristics Among Many Parallel Optical Fibers

Theoretical study of pump absorption of colinear side-pumping coupler with pumping and absorption loops

Research on Characteristics of Co-Linear Side-Pumping Couplers with Special Double-Clad Fibers

Tapered Fused Fiber Bundle Coupler Capable of 1 Kw Laser Combining and 300 W Laser Splitting

The Influence of the Geometric Parameters of an Impeller on the Transport Capability of Long Flexible Fiber in a Non-Clogging Pump

Tapered Fiber Bundle 7 $\,\times\,$ 1 End-Pumping Coupler Capable of High Power CW Operation