Abstract:The power of fiber lasers based on homemade gain fiber has been increased to kilowatt or 10 kilowatts level in recent years. However, restricted by the low absorption coefficient at 1018 nm, the power of tandem pumped fiber laser with homemade gain fiber is not very high. In this paper, adopting a MOPA configuration, we reported a high power tandem pumped fiber laser. The narrow line width seed, whose center wavelength was at 1070 nm and the half height full width was 0.28 nm, was amplified to 5220 W by the pump source of 1018 nm fiber lasers. The output power increased linearly with the pump laser power. The homemade gain fiber in the experiment was 30/250 lam, and the absorption coefficient at 1018 nm was 0.4 dB/m Thanks to the low quantum defect of tandem pumping scheme, the optical to optical efficiency could reach 89.9%. At the full power level, the 3 dB line width and 10 dB line width was measured to be 1.1 nm and 3.89 nm, respectively. The stimulated Raman scattering (SRS) suppression of 23 dB on the spectrum was achieved by optimizing the homemade gain fiber length to 36 m. The beam quality factor off was measured to be 2.4. No obvious transverse mode instability was found. Further power scaling requires increase the absorption coefficient of the gain fiber and more methods for SRS suppression.

Research on Multi-Kilowatts Level Tapered Fiber Bundle N×1 Pumping Combiner for High Power Fiber Laser

Tapered Fiber Bundle 7 $\,\times\,$ 1 End-Pumping Coupler Capable of High Power CW Operation

Tapered Fused Fiber Bundle Coupler Capable of 1 Kw Laser Combining and 300 W Laser Splitting

High power signal combiner for fiber lasers

Design and fabrication of >20 KW 5 × 1 pump combiner with high efficiency

High-robustness good-beam-quality 3×1 signal combiner device for 10-kW all-fiber laser combining applications

Novel 3 × 1 signal combiner with high-power fiber laser output of high beam quality

End-pump silica-fluoride fiber combiner utilizing tapering and assembling technique for mid-infrared laser systems

Vector-dispersion Compensation and Pulse Pedestal Cancellation in a Femtosecond Nonlinear Amplification Fiber Laser System.

High power ring spot adjustable fiber combiner based on (6 + 3) × 1 structure

High coupling efficiency and low signal light loss (2 + 1) × 1 coupler

Pump-Signal Combiner With Large-Core Signal Fiber Feed-Through For Fiber Lasers And Amplifiers

High power mid-infrared side-pump combiner with good thermal stability based on the point-by-point fusion splicing technique

Pump Couplers in a Series Connection

Pump Couplers in A Cascaded Structure

Fused angle-polished multi-points side-pumping coupler for monolithic fiber lasers and amplifiers

100 Μm Core Diameter Monolithic Fiber Side-Pumping Coupler for 10 Mj 10 Ns All-Fiber Laser

A Side-Pump Coupler With Refractive Index Valley Configuration for Fiber Lasers and Amplifiers

Experimental Research on High Power Tandem Pumped Fiber Laser with Homemade Gain Fiber

Fiber coupler for mode selection and high-efficiency pump coupling.

Review of High Power Fiber Laser Pump Coupling Technology