Abstract:Fiber pump lasers are widely used in a variety of fields, such as optical fiber communication, national defense, and medical beauty due to their high beam quality and intense laser energy. However, the alignment errors of optical parameters can influence the beam quality in the packaging of the fiber pump lasers. It is necessary to analyze the reflector, focusing lens, fiber, and the laser diode on the coupling influence between for guiding the fiber pump laser packaging. Firstly, we establish the optical path between the laser diode, focusing lens and reflector based on the physical ray-tracing method. On the other hand, the high coupling efficiency of whole system is achieved by optimize the parameters of each optical element. The simulation result shows that the highest coupling efficiency is 98.6% based on optimizing the parameters of the optical path while the experimental result of coupling efficiency is 90.36%. Also, the effects of refractive index, wavelength and fiber diameter on coupling efficiency are further investigated. The experimental results show that the radial displacement has the greatest influence on the coupling efficiency. The simulation results show that increasing the fiber core diameter can effectively improve the coupling efficiency. The results of rigorous analysis will provide an effective reference for manufacturing compact, high coupling efficiency fiber pumped laser.

Fused angle-polished multi-points side-pumping coupler for monolithic fiber lasers and amplifiers

Coupling Efficiency of Angle-Polished Method for Side-Pumping Technology

A Side-Pump Coupler With Refractive Index Valley Configuration for Fiber Lasers and Amplifiers

A Simple Approach to Fiber-Based Tunable Microcavity with High Coupling Efficiency

Comparison of Fiber-to-Waveguide Couplers in Point Diffraction Interferometer Based on Waveguide Reference Wavefront Source

Fused Side-Coupler for Double-Clad Fiber Lasers

High-efficiency Grating Coupler Based on Fast Directional Optimization and Robust Layout Strategy in 130 Nm CMOS Process.

100 Μm Core Diameter Monolithic Fiber Side-Pumping Coupler for 10 Mj 10 Ns All-Fiber Laser

End-pump silica-fluoride fiber combiner utilizing tapering and assembling technique for mid-infrared laser systems

Investigation of a twisting-fused side-pump coupler based on tellurite fiber

Fabrication of a tellurite-fiber-based side-pump coupler based on the tapered-fused method

Tapered Fused Fiber Bundle Coupler Capable of 1 Kw Laser Combining and 300 W Laser Splitting

Fused side-coupler for double-clad fiber lasers with CO_2 laser

Studies of pump light leakage out of couplers for multi-coupler side-pumped Yb-doped double-clad fiber lasers

High coupling efficiency and low signal light loss (2 + 1) × 1 coupler

The coupling study between multi-channel laser diodes and multimode fiber in a fiber pump laser

Multi-coupler Side-Pumped Yb-doped Double-Clad Fiber Laser

Research on Multi-Kilowatts Level Tapered Fiber Bundle N×1 Pumping Combiner for High Power Fiber Laser

Fiber coupler for mode selection and high-efficiency pump coupling.

Theoretical study of pumping absorption in a co-linear side-pumping coupler

Single-mode Fiber Auto-Coupling System with Wedges