Power Sensor Characterization From 110 to 170 GHz Using a Waveguide Calorimeter
Murat Celep,Milan Salek,Daniel Stokes,James Skinner,Yi Wang
DOI: https://doi.org/10.1109/tim.2022.3144209
IF: 5.6
2022-01-01
IEEE Transactions on Instrumentation and Measurement
Abstract:This article proposes a new calorimetry-based measurement method to measure absolute microwave power obtained through dc substituted power from 110 to 170 GHz (WG 29, WR 6/7, or D-band) using a custom-designed thin-film microwave power sensor. This method complements traditional microcalorimetry techniques used to provide traceability for microwave power in this band while diversifying the potential applications and accessibility to such traceability. The thermopile of the measurement system was characterized using a known dc power with the microwave sensor and the thermopile coefficient obtained. Absolute microwave power on the microwave sensor was calculated using the thermopile coefficient and was used to remove the effect of a thermal isolation section (TIS) and calorimeter unbalance effect. To transfer the power traceability from the calorimeter to microwave power measurement applications, the effective efficiency of a device under test (DUT), consisting of a power sensor/meter combination, was defined using the calorimeter’s absolute microwave power and the $S$ -parameters of the measurement system and the DUT. The effective efficiency (EE) of the DUT was obtained between 0.9386 and 0.9815 for the whole frequency band.
engineering, electrical & electronic,instruments & instrumentation