Abstract:This paper presents a setup for measuring the Seebeck coefficient and the electrical resistivity of bulk thermoelectric materials. The sample holder was designed to have a compact structure and can be directly mounted in a standard cryostat system for temperature-dependent measurements. For the Seebeck coefficient measurement, a thin bar-shaped sample is mounted bridging two copper bases; and two ceramic heaters are used to generate a temperature gradient along the sample. Two type T thermocouples are used to determine both temperature and voltage differences between two widely separated points on the sample. The thermocouple junction is flattened into a disk and pressed onto the sample surface by using a spring load. The flexible fixation method we adopted not only simplifies the sample mounting process but also prevents thermal contact deterioration due to the mismatch of thermal expansion coefficients between the sample and other parts. With certain modifications, the sample holder can also be used for four-probe electrical resistivity measurements. High temperature measurements are essential for thermoelectric power generation. The experimental system we developed is capable of measuring the Seebeck coefficient and the electrical resistivity of bulk thermoelectric materials in a wide temperature range from 80 to 500 K, which can be further extended to even higher temperatures. Measurements on two standard materials, constantan and nickel, confirmed the accuracy and the reliability of the system.

A Self-Heating 2ω Method for Seebeck Coefficient Measurement of Thermoelectric Materials.

Ac heating-dc detecting method for Seebeck coefficient measurement of the thermoelectric micro/nano devices

Simultaneous thermal conductivity and specific heat measurements of thin samples by transient Joule self-heating

Three-wire Method to Characterize the Thermoelectric Properties of One-Dimensional Materials

A Setup for Measuring the Seebeck Coefficient and the Electrical Resistivity of Bulk Thermoelectric Materials

An Alternating-Current Voltage Modulated Thermal Probe Technique for Local Seebeck Coefficient Characterization

Measurement and Analysis for Performance of Micro-thermoelectric Generator

High-Temperature Measurement of Seebeck Coefficient and Electrical Conductivity

Data Fitting and Analysis of Performance for Micro-thermoelectric Generator

A METHOD FOR THERMOELECTRIC MEASUREMENTS ON MESOSCOPIC SAMPLES

Reliable Measurements of the Seebeck Coefficient on A Commercial System

Accurate Measurement of Seebeck Coefficient

Numerical Approach for the Theory of Harmonic Self-Heating Technique to Measure Thermophysical Properties of Suspended Thin Samples

Novel Ac Heating–dc Detection Method for Active Thermoelectric Scanning Thermal Microscopy

Simple, Reversible Gradient Seebeck Coefficient Measurement System for 300-600K

Fast Seebeck Coefficient Measurement Based on Dynamic Method.

Direct Mapping of Local Seebeck Coefficient in 2D Material Nanostructures via Scanning Thermal Gate Microscopy

A New Laser-Combined H-Type Device Method for Comprehensive Thermoelectrical Properties Characterization of Two-Dimensional Materials

Toward thermoelectric characterization of (nano)materials by in situ transmission electron microscopy

A T-type Method for Characterization of the Thermoelectric Performance of an Individual Free-Standing Single Crystal Bi2S3 Nanowire.

High-throughput imaging measurements of thermoelectric figure of merit