Atomic-Layer-Deposited SiO x /SnO x Nanolaminate Structure for Moisture and Hydrogen Gas Diffusion Barriers
Ju-Hwan Han,Seong-Hyeon Lee,Seok-Goo Jeong,Dong-Yeon Kim,Hae Lin Yang,Seunghwan Lee,Seung Yeon Yoo,Inho Park,Ho Bum Park,Kwang-Su Lim,Won-Jae Yang,Hyun-Chul Choi,Jin-Seong Park
DOI: https://doi.org/10.1021/acsami.1c09901
2021-08-12
Abstract:High-density SnOx and SiOx thin films were deposited via atomic layer deposition (ALD) at low temperatures (100 °C) using tetrakis(dimethylamino)tin(IV) (TDMASn) and di-isopropylaminosilane (DIPAS) as precursors and hydrogen peroxide (H2O2) and O2 plasma as reactants, respectively. The thin-film encapsulation (TFE) properties of SnOx and SiOx were demonstrated with thickness dependence measurements of the water vapor transmission rate (WVTR) evaluated at 50 °C and 90% relative humidity, and different TFE performance tendencies were observed between thermal and plasma ALD SnOx. The film density, crystallinity, and pinholes formed in the SnOx film appeared to be closely related to the diffusion barrier properties of the film. Based on the above results, a nanolaminate (NL) structure consisting of SiOx and SnOx deposited using plasma-enhanced ALD was measured using WVTR (H2O molecule diffusion) at 2.43 × 10–5 g/m2 day with a 10/10 nm NL structure and time-lag gas permeation measurement (H2 gas diffusion) for applications as passivation layers in various electronic devices.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c09901.Examples of measurement results through time-lag measurement (for H2 and O2 gas) (Figure S1); XRD, AFM, and XRR of p-SiOx ALD film (Figure S2); growth schematics of p-SnOx and t-SnOx: adsorption of TDMASn on the surface, reaction of oxygen radical and adsorbed TDMASn on the surface in p-SnOx, and reaction of hydrogen peroxide vapor and adsorbed TDMASn on the surface in t-SnOx (Figure S3); ratio of WVTR before and after bending test (5 mm radius, 5000 cycles) with the single layer (p-SiOx, p-SnOx) and nanolaminate structures (p-SiOx/p-SnOx (10/10)); compared to single layers, the ratio of WVTR decreased relieving the external stress in the 10/10 NL structure (Figure S4) (PDF)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology