Abstract:With the advent of the 5G era, surface acoustic wave (SAW) devices with a larger bandwidth and better temperature stability are strongly required, meanwhile the dimensions of devices are continuously scaling down. In this work, a new layout of ZnO/SiO2/Al2O3 SAW devices with embedded electrodes was developed, and with the help of the finite element method (FEM), the propagation characteristics were simulated. Through adopting embedded electrodes, a large electromechanical coupling coefficient (K2) of 6.6% for the Rayleigh mode can be achieved (5 times larger than that of the conventional ZnO/Al2O3 structure), feasible for wideband SAW devices, and a low acoustic velocity (Vp) of 2960 m/s is exhibited simultaneously, which benefits the miniaturization of SAW devices. The dramatic enhancement of K2 is mainly attributed to the more efficient excitation of SAW in piezoelectric films. Furthermore, a SiO2 overlay is added on the top of the structure to gain an excellent zero temperature coefficient of frequency (TCF). Experimentally, we successfully fabricated SAW one-port resonators based on the proposed structure and good characteristics of high K2, low Vp, and small TCF as simulated were confirmed. Our results show that the proposed structure provides a viable route to design SAW devices with a large bandwidth, small size, and robust temperature compensation for practical use.This article has not yet been cited by other publications.

Over 12% of Coupling Coefficient Demonstrated by 3GHz Sc0.12Al0.88N Based Laterally Coupled Alternating Thickness (LCAT) Mode Resonators

Adjustable effective electromechanical coupling of Lamb wave resonator using AlN/Sc0.096Al0.904N composite films

AlN/ScAlN composite films-based spurious free A1 mode lamb wave resonator with adjustable effective electromechanical coupling coefficient

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

A near spurious-free 6 GHz LLSAW resonator with large electromechanical coupling on X-cut LiNbO3/SiC bilayer substrate

Transducer design for AlN Lamb wave resonators

Enhanced Performance Of Zno/Sio2/Al2o3 Surface Acoustic Wave Devices With Embedded Electrodes

High Electromechanical Coupling Factor Lamb Wave Resonator

AlScN-Based Dual-Mode Devices With Temperature Compensated Strategy and Process Optimization

Enhanced Coupling Coefficient in Dual-Mode ZnO/SiC Surface Acoustic Wave Devices with Partially Etched Piezoelectric Layer

Enhanced Performance of ZnO/SiO 2 /Al 2 O 3 Surface Acoustic Wave Devices with Embedded Electrodes

LITHIUM NIOBATE THIN FILM BASED A1 MODE RESONATORS WITH FREQUENCY UP TO 16 GHZ AND ELECTROMECHANICAL COUPLING FACTOR NEAR 35%

A 5.3 GHz Al0.76Sc0.24N Two-Dimensional Resonant Rods Resonator with a kt2 of 23.9%

AlN Combined Overtone Resonators for the 5G mmWave Spectrum

Study on the impact of the resonant cavity and lateral acoustic edge reflector for AlSc 0.095 N-based S0 mode Lamb-wave resonators

ScAlN-on-SiC Ku-Band Solidly-Mounted Bidimensional Mode Resonators

C-Band Lithium Niobate on Silicon Carbide SAW Resonator With Figure-of-Merit of 124 at 6.5 GHz

Ultra flexible pseudo-lamb wave RF resonators based on ZnO/PI and AlN/PI structures

Aln Checker-Mode Resonators With Routing Structures

High Performance AlScN Thin Film Based Surface Acoustic Wave Devices with Large Electromechanical Coupling Coefficient

Near 6 GHz Sezawa Mode Surface Acoustic Wave Resonators using AlScN on SiC