Abstract:Abstract Introduction The absorption of radiofrequency (RF) energy during an MRI procedure may cause tissue heating in the vicinity of an implanted device, such as a stent or a stented valve, potentially causing patient harm. Computational modeling and simulation (M&S) can be used by medical device manufacturers to assess the RF-induced heating of implanted devices during an MRI scan and identify worst-case configurations within a given line of implants. However, despite the use of in-silico tools, a standard for in-silico testing of such problematic is still missing; The tool here proposed is a web-based application that automates the set-up and solution of RF-heating analysis, in line with existing standards for in-vitro testing. Methods The presented tool is part of a commercial web-based platform. The tool was developed in collaboration with the market leader of computer-aided engineering software and as part of a Research Collaboration Agreement with the American regulatory body. Commercial software was used to compute RF energy absorption and thermal heating of implantable medical devices replicating the directives of the ASTM F2182–11a Standard Test Method. The model is integrated in an automated workflow. Each simulation submitted by the user is sent to the cloud infrastructure for solution. Simulation results are stored in a database for later retrieval and report generation. Results The tool consists of a web-interface where the user can: i) upload the medical device computer-aided design (CAD) or select a simplified geometry from a library; ii) define the material properties of the device; ii) specify the desired input parameters specific to an MRI exposure scenario. Specifically, it is possible to study the device exposure: i) at different field frequencies (i.e., 64 MHz and 128 MHz); ii) at different powers (i.e., 2, 4 and 10 W/kg Whole body Specific Absorption Rate - SAR); iii) at different field polarizations (i.e., two circular and two linear); and iv) for different exposure time (i.e., form 240 s to 900 s). The presented tool allows the users to view and export results for each simulation, including electromagnetic fields, local SAR, and the temperature rise over time. Finally, the simulation results are summarized in an automatically generated report that follows regulatory guidance on M&S reporting. Conclusion The presented web-based M&S tool allows users to perform the thermal safety assessment of implantable medical devices during an MRI procedure following established good simulation practices. Minimal training or background in computer modeling is required to use the tool. Specific potential applications of the tool include RF-heating assessment of cardiovascular devices (e.g., stents, stented valves, stent retrievers). The proposed platform promotes the broader adoption of digital evidence in preclinical trials for RF safety analysis, supporting the device submission process and pre-market regulatory evaluation. Stent safety simulation result interface Funding Acknowledgement Type of funding source: None

Evaluation of electromagnetic field distributions under 1.5 T MRI scanning within human models of a virtual family

Simulation Study of the Potential Hazards of Cardiac Stimulation by Induced Eddy-Currents in Modern MRI

Influence of magnetically-induced E-fields on cardiac electric activity during MRI: A modeling study.

On evaluation of MRI coil excited radio-frequency fields inside multilayered spherical head phantom——DyadicGreen's function/MoM method

Simulation study of heart stimulation caused by MRI electromagnetic field

Safety Study of Implant Wearers in MRI RF Field Environment

Electromagnetic simulation and electromagnetic safety characteristics analysis of implantable medical devices in wireless charging processes

Dual-Frequency High-Electric-Field Generator for MRI Safety Testing of Passive Implantable Medical Devices

A new method to improve RF safety of implantable medical devices using inductive coupling at 3.0 T MRI

A Novel Device Model Validation Strategy for 1.5- and 3-T MRI Heating Safety Assessment

Impact of MRI RF coil design on the RF-induced heating of medical implants: fixed B1+ rms exposure vs normal operating mode

Efficient high-resolution electric and magnetic field simulations inside the human body in the vicinity of wireless power transfer systems with varying models

Evaluation of Induced Current Densities and SAR in the Human Body by Strong Magnetic Fields around 100 kHz

An automated computational tool to study MRI safety of implanted passive cardiovascular medical devices

Impact of Patient Postures on the RF-Induced Heating for the Active Implantable Medical Device (AIMD) at 1.5T MRI

Electromagnetic Modeling of the Implantable Electrode for Transfer Function Calibration in MRI RF-Induced Heating Assessment

[Research on Construction of Test Environment for Assessment of RF-Induced Heating Effects of Implants]

Patient's head position-dependent safety analysis of birdcage coil, loop array, and dipole array for applications at 300 MHz in magnetic resonance imaging based on hydrogen nuclei: Simulation study

A Review of Numerical Simulation and Analytical Modeling for Medical Devices Safety in MRI

Role of MRI Coils in Radio Frequency Heating of Implantable Medical Devices

Radio-Frequency Safety Assessment of Stents in Blood Vessels During Magnetic Resonance Imaging