Abstract:<section class="article-section__content"><h3 class="article-section__sub-title section1"> Purpose</h3><p>In this study, we investigate a strategy to reduce the local specific absorption rate (SAR) while keeping constant inside the region of interest (ROI) at the ultra‐high field (B<sub>0</sub> ≥ 7T) MRI. </p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Methods</h3><p>Locally raising the resonance structure under the discontinuity (i.e., creating a bump) increases the distance between the accumulated charges and the tissue. As a result, it reduces the electric field and local SAR generated by these charges inside the tissue. The at a point that is sufficiently far from the coil, however, is not affected by this modification. In this study, three different resonant elements (i.e., loop coil, snake antenna, and fractionated dipole [FD]) are investigated. For experimental validation, a bumped FD is further investigated at 10.5T. After the validation, the transmit performances of eight‐channel arrays of each element are compared through electromagnetic (EM) simulations. </p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Results</h3><p>Introducing a bump reduced the peak 10g‐averaged SAR by 21, 26, 23% for the loop and snake antenna at 7T, and FD at 10.5T, respectively. In addition, eight‐channel bumped FD array at 10.5T had a 27% lower peak 10g‐averaged SAR in a realistic human body simulation (i.e., prostate imaging) compared to an eight‐channel FD array.</p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Conclusion</h3><p>In this study, we investigated a simple design strategy based on adding bumps to a resonant element to reduce the local SAR while maintaining inside an ROI. As an example, we modified an FD and performed EM simulations and phantom experiments with a 10.5T scanner. Results show that the peak 10g‐averaged SAR can be reduced more than 25%. </p></section>

Patient's head position-dependent safety analysis of birdcage coil, loop array, and dipole array for applications at 300 MHz in magnetic resonance imaging based on hydrogen nuclei: Simulation study

On evaluation of MRI coil excited radio-frequency fields inside multilayered spherical head phantom——DyadicGreen's function/MoM method

Evaluation of specific absorption rate and heating in children exposed to a 7T MRI head coil

Safety Study of Implant Wearers in MRI RF Field Environment

Experimental assessment of clinical MRI-induced global SAR distributions in head phantoms

A new method to improve RF safety of implantable medical devices using inductive coupling at 3.0 T MRI

Computation of electromagnetic fields for high-frequency magnetic resonance imaging applications

Electric Field and SAR Reduction in High Impedance RF Arrays by Using High Permittivity Materials for 7T MR Imaging

Specific absorption rate and temperature in neonate models resulting from exposure to a 7T head coil

Electric field measurements in preclinical MRI at 11.7 T and 7 T for experimental SAR comparison

Study on the Effect of Non-Symmetrical Current Distribution Controlled by Capacitor Placement in Radio-Frequency Coils for 7T MRI

Radio-Frequency Safety Assessment of Stents in Blood Vessels During Magnetic Resonance Imaging

Improving radiofrequency power and specific absorption rate management with bumped transmit elements in ultra‐high field MRI

A Self-Matched Leaky-Wave Antenna for Ultrahigh-Field MRI with Low SAR

Design of multi-row parallel-transmit coil arrays for enhanced SAR efficiency with deep brain electrodes at 3T: an electromagnetic simulation study

Evaluation of the RF depositions at 3T in routine clinical scans with respect to the SAR safety to improve efficiency of MRI utilization

Potential for high-permittivity materials to reduce local SAR at a pacemaker lead tip during MRI of the head with a body transmit coil at 3 T

Virtual population-based assessment of the impact of 3 Tesla radiofrequency shimming and thermoregulation on safety and B1 + uniformity

Intersubject specific absorption rate variability analysis through construction of 23 realistic body models for prostate imaging at 7T

Evaluation of Induced Current Densities and SAR in the Human Body by Strong Magnetic Fields around 100 kHz

Impact of MRI RF coil design on the RF-induced heating of medical implants: fixed B1+ rms exposure vs normal operating mode