Abstract:Abstract Introduction The absorption of radiofrequency (RF) energy during an MRI procedure may cause tissue heating in the vicinity of an implanted device, such as a stent or a stented valve, potentially causing patient harm. Computational modeling and simulation (M&S) can be used by medical device manufacturers to assess the RF-induced heating of implanted devices during an MRI scan and identify worst-case configurations within a given line of implants. However, despite the use of in-silico tools, a standard for in-silico testing of such problematic is still missing; The tool here proposed is a web-based application that automates the set-up and solution of RF-heating analysis, in line with existing standards for in-vitro testing. Methods The presented tool is part of a commercial web-based platform. The tool was developed in collaboration with the market leader of computer-aided engineering software and as part of a Research Collaboration Agreement with the American regulatory body. Commercial software was used to compute RF energy absorption and thermal heating of implantable medical devices replicating the directives of the ASTM F2182–11a Standard Test Method. The model is integrated in an automated workflow. Each simulation submitted by the user is sent to the cloud infrastructure for solution. Simulation results are stored in a database for later retrieval and report generation. Results The tool consists of a web-interface where the user can: i) upload the medical device computer-aided design (CAD) or select a simplified geometry from a library; ii) define the material properties of the device; ii) specify the desired input parameters specific to an MRI exposure scenario. Specifically, it is possible to study the device exposure: i) at different field frequencies (i.e., 64 MHz and 128 MHz); ii) at different powers (i.e., 2, 4 and 10 W/kg Whole body Specific Absorption Rate - SAR); iii) at different field polarizations (i.e., two circular and two linear); and iv) for different exposure time (i.e., form 240 s to 900 s). The presented tool allows the users to view and export results for each simulation, including electromagnetic fields, local SAR, and the temperature rise over time. Finally, the simulation results are summarized in an automatically generated report that follows regulatory guidance on M&S reporting. Conclusion The presented web-based M&S tool allows users to perform the thermal safety assessment of implantable medical devices during an MRI procedure following established good simulation practices. Minimal training or background in computer modeling is required to use the tool. Specific potential applications of the tool include RF-heating assessment of cardiovascular devices (e.g., stents, stented valves, stent retrievers). The proposed platform promotes the broader adoption of digital evidence in preclinical trials for RF safety analysis, supporting the device submission process and pre-market regulatory evaluation. Stent safety simulation result interface Funding Acknowledgement Type of funding source: None

A Review of Numerical Simulation and Analytical Modeling for Medical Devices Safety in MRI

Simulation Study of the Potential Hazards of Cardiac Stimulation by Induced Eddy-Currents in Modern MRI

Characterization and Reduction of X-Gradient Induced Eddy Currents in A Ndfeb Magnetic Resonance Imaging Magnet-3d Finite Element Method-Based Numerical Studies

An automated computational tool to study MRI safety of implanted passive cardiovascular medical devices

Clinical Quantitative Susceptibility Mapping (QSM): Biometal Imaging and Its Emerging Roles in Patient Care

A Novel Device Model Validation Strategy for 1.5- and 3-T MRI Heating Safety Assessment

Radio-Frequency Safety Assessment of Stents in Blood Vessels During Magnetic Resonance Imaging

Magnetic resonance safety

New Insights into MR Safety for Implantable Medical Devices

Safety Study of Implant Wearers in MRI RF Field Environment

A 3-year review of MRI safety incidents within a UK independent sector provider of diagnostic services

Electromagnetic computation and modeling in MRI

A new method to improve RF safety of implantable medical devices using inductive coupling at 3.0 T MRI

Development, validation, and pilot MRI safety study of a high-resolution, open source, whole body pediatric numerical simulation model

Efficient high-resolution electric and magnetic field simulations inside the human body in the vicinity of wireless power transfer systems with varying models

A Validated Methodological Approach to Prove the Safety of Clinical Electromagnetic Induction Systems in Magnetic Hyperthermia

Safety of magnetic resonance imaging in patients with retained cardiac leads

A Review of Magnetic Resonance (MR) Safety: The Essentials to Patient Safety

ESR Essentials: advanced MR safety in vulnerable patients-practice recommendations by the European Society for Magnetic Resonance in Medicine and Biology

Safety of Magnetic Resonance Imaging in Patients with Cardiac Implantable Electronic Devices

Systematic review of MRI safety literature in relation to radiofrequency thermal injury prevention