Abstract:Radio frequency (RF)-induced heating associated with medical implants is a critical concern when performing a magnetic resonance imaging (MRI) scan. The purpose of this study is to construct a “digital twin” of RF coil integrated in an MRI scanner by <inline-formula> <tex-math notation="LaTeX">$B_{1}^{+}$ </tex-math></inline-formula> map matching, reproducing the physical electromagnetic (EM) field, allowing it to be a qualified test environment for heating evaluations. <inline-formula> <tex-math notation="LaTeX">$B_{1}^{+}$ </tex-math></inline-formula> map inside an American Society for Testing Material (ASTM) phantom with various positions was used to characterize the physical EM field. A loaded tuned two-port birdcage body coil model was established to generate the numerical EM field and optimized to minimize the difference between the measured and simulated fields, which was quantified by “mean symmetric mean absolute percentage error” (mSMAPE). The amplitude of the simulated field was normalized to MR sequence labeling. Finally, the average specific absorption rate (SAR) inside the ASTM phantom was measured in a calorimetry experiment and compared to simulation one heated by the pre-established coil. A heating experiment was performed on an insulated cable to further validate the established test environment. The impact of excitation parameters and the port location was investigated. mSMAPE of the optimized field was less than 10%. The difference between the simulated and measured average SAR was 8.5%. <inline-formula> <tex-math notation="LaTeX">$R^{2}$ </tex-math></inline-formula> for the linear regression of the temperature rise and predicted power deposition using the optimized field was 0.993. The digital twin was successfully constructed and verified a sufficiently accurate description of the physical field. The established construction method of the digital twin provides a handy choice for building RF test environment and may create more possibilities for the development of this area.

Role of MRI Coils in Radio Frequency Heating of Implantable Medical Devices

On evaluation of MRI coil excited radio-frequency fields inside multilayered spherical head phantom——DyadicGreen's function/MoM method

Accurate Evaluation of RF Coil-Tissue Interactions Using a Hybrid FDTD-MoM Method

Safety Study of Implant Wearers in MRI RF Field Environment

Impact of MRI RF coil design on the RF-induced heating of medical implants: fixed B1+ rms exposure vs normal operating mode

Electromagnetic Modeling of the Implantable Electrode for Transfer Function Calibration in MRI RF-Induced Heating Assessment

Electrode Sensitivity for MRI-RF Induced Heating Evaluation of Active Implantable Medical Device

Constructing a Digital Twin of the Birdcage Coil in an MR Scanner by Map Matching: For Radio Frequency Heating Evaluation of Implantable Medical Devices

A new method to improve RF safety of implantable medical devices using inductive coupling at 3.0 T MRI

Evaluation of Local B-1 Field As Dosimeter of RF Heating for Implant in MRI

Effect of Strain Relief Loop Position on the RF-Induced Heating of Active Implantable Medical Devices at 1.5-T MRI

Study of the radiofrequency-induced heating inside the human head with dental implants at 7 T

Investigation of Artifacts and Optimization in Proton Resonance Frequency Thermometry Towards Heating Risk Monitoring of Implantable Medical Devices in Magnetic Resonance Imaging.

Comparative Study of RF Heating in Deep Brain Stimulation Devices During MRI at 1.5 T and 0.55 T: Challenging the Assumption of Safety at Low Field Strengths

Impact of Patient Postures on the RF-Induced Heating for the Active Implantable Medical Device (AIMD) at 1.5T MRI

Simultaneous radiofrequency (RF) heating and magnetic resonance (MR) thermal mapping using an intravascular MR imaging/RF heating system.

Study of Deep Brain Stimulation Lead Resonant Length in 3.0 T MRI RF Magnetic Field

A Novel Device Model Validation Strategy for 1.5- and 3-T MRI Heating Safety Assessment

A Detachable Interventional Magnetic Resonance Imaging Coil for Cerebral Surgery

Screen-printed flexible MRI receive coils

Design of miniatured MRI coils for MRI‐guided tumor diagnosis and hyperthermia therapy