Abstract:Background: Heating around deep brain stimulation (DBS) in magnetic resonance imaging (MRI) occurs when the time-varying electromagnetic (EM) fields induce currents in the electrodes which can generate heat and potentially cause tissue damage. Predicting the heating around the electrode contacts is important to ensure the safety of patients with DBS implants undergoing an MRI scan. We previously proposed a workflow to predict heating around DBS contacts and introduced a parameter, equivalent transimpedance, that is independent of electrode trajectories, termination, and radiofrequency (RF) excitations. The workflow performance was validated in a unilateral DBS system. Purpose: To predict RF heating around the contacts of bilateral (DBS) electrodes during an MRI scan in an anthropomorphic head phantom. Methods: Bilateral electrodes were fixed in a skull phantom filled with hydroxyethyl cellulose (HEC) gel. The electrode shafts were suspended extracranially, in a head and torso phantom filled with the same gel material. The current induced on the electrode shaft was experimentally measured using an MR-based technique 3 cm above the tip. A transimpedance value determined in a previous offline calibration was used to scale the shaft current and calculate the contact voltage. The voltage was assigned as a boundary condition on the electrical contacts of the electrode in a quasi-static (EM) simulation. The resulting specific absorption rate (SAR) distribution became the input for a transient thermal simulation and was used to predict the heating around the contacts. RF heating experiments were performed for eight different lead trajectories using circularly polarized (CP) excitation and two linear excitations for one trajectory. The measured temperatures for all experiments were compared with the simulated temperatures and the root-mean-squared errors (RMSE) were calculated. Results: The RF heating around the contacts of both bilateral electrodes was predicted with ≤ 0.29°C of RMSE for 20 heating scenarios. Conclusion: The workflow successfully predicted the heating for different bilateral DBS trajectories and excitation patterns in an anthropomorphic head phantom.

Electromagnetic Modeling of the Implantable Electrode for Transfer Function Calibration in MRI RF-Induced Heating Assessment

Accurate Evaluation of RF Coil-Tissue Interactions Using a Hybrid FDTD-MoM Method

Electrode Sensitivity for MRI-RF Induced Heating Evaluation of Active Implantable Medical Device

On evaluation of MRI coil excited radio-frequency fields inside multilayered spherical head phantom——DyadicGreen's function/MoM method

Translational Excitation Strategy for Scaled Transfer Function Measurement of Medical Implants

Role of MRI Coils in Radio Frequency Heating of Implantable Medical Devices

[Research on Construction of Test Environment for Assessment of RF-Induced Heating Effects of Implants]

Safety Study of Implant Wearers in MRI RF Field Environment

Constructing a Digital Twin of the Birdcage Coil in an MR Scanner by Map Matching: For Radio Frequency Heating Evaluation of Implantable Medical Devices

Modeling and measurement of lead tip heating and resonant length for implanted, insulated wires

Investigation of Artifacts and Optimization in Proton Resonance Frequency Thermometry Towards Heating Risk Monitoring of Implantable Medical Devices in Magnetic Resonance Imaging.

A new method to improve RF safety of implantable medical devices using inductive coupling at 3.0 T MRI

Wirelessly interfacing sensor-equipped implants and MR scanners for improved safety and imaging

A workflow for predicting radiofrequency-induced heating around bilateral deep brain stimulation electrodes in MRI

Simultaneous radiofrequency (RF) heating and magnetic resonance (MR) thermal mapping using an intravascular MR imaging/RF heating system.

Evaluation of Local B-1 Field As Dosimeter of RF Heating for Implant in MRI

Study of the radiofrequency-induced heating inside the human head with dental implants at 7 T

An experimental method for measuring the electric fields induced by Tumor Treating Fields

A Novel Device Model Validation Strategy for 1.5- and 3-T MRI Heating Safety Assessment

Probe Design for Measurement and Verification of Electric Field Induced by Figure-8 Coil in Transcranial Magnetic Stimulation

Study of Deep Brain Stimulation Lead Resonant Length in 3.0 T MRI RF Magnetic Field