Abstract:Abstract Introduction The absorption of radiofrequency (RF) energy during an MRI procedure may cause tissue heating in the vicinity of an implanted device, such as a stent or a stented valve, potentially causing patient harm. Computational modeling and simulation (M&S) can be used by medical device manufacturers to assess the RF-induced heating of implanted devices during an MRI scan and identify worst-case configurations within a given line of implants. However, despite the use of in-silico tools, a standard for in-silico testing of such problematic is still missing; The tool here proposed is a web-based application that automates the set-up and solution of RF-heating analysis, in line with existing standards for in-vitro testing. Methods The presented tool is part of a commercial web-based platform. The tool was developed in collaboration with the market leader of computer-aided engineering software and as part of a Research Collaboration Agreement with the American regulatory body. Commercial software was used to compute RF energy absorption and thermal heating of implantable medical devices replicating the directives of the ASTM F2182–11a Standard Test Method. The model is integrated in an automated workflow. Each simulation submitted by the user is sent to the cloud infrastructure for solution. Simulation results are stored in a database for later retrieval and report generation. Results The tool consists of a web-interface where the user can: i) upload the medical device computer-aided design (CAD) or select a simplified geometry from a library; ii) define the material properties of the device; ii) specify the desired input parameters specific to an MRI exposure scenario. Specifically, it is possible to study the device exposure: i) at different field frequencies (i.e., 64 MHz and 128 MHz); ii) at different powers (i.e., 2, 4 and 10 W/kg Whole body Specific Absorption Rate - SAR); iii) at different field polarizations (i.e., two circular and two linear); and iv) for different exposure time (i.e., form 240 s to 900 s). The presented tool allows the users to view and export results for each simulation, including electromagnetic fields, local SAR, and the temperature rise over time. Finally, the simulation results are summarized in an automatically generated report that follows regulatory guidance on M&S reporting. Conclusion The presented web-based M&S tool allows users to perform the thermal safety assessment of implantable medical devices during an MRI procedure following established good simulation practices. Minimal training or background in computer modeling is required to use the tool. Specific potential applications of the tool include RF-heating assessment of cardiovascular devices (e.g., stents, stented valves, stent retrievers). The proposed platform promotes the broader adoption of digital evidence in preclinical trials for RF safety analysis, supporting the device submission process and pre-market regulatory evaluation. Stent safety simulation result interface Funding Acknowledgement Type of funding source: None

A workflow for predicting radiofrequency-induced heating around bilateral deep brain stimulation electrodes in MRI

Effect of Device Configuration and Patient's Body Composition on the RF Heating and Nonsusceptibility Artifact of Deep Brain Stimulation Implants During MRI at 1.5T and 3T

Optimizing the trajectory of deep brain stimulation leads reduces RF heating during MRI at 3 T: Characteristics and clinical translation

Effect of surgical modification of deep brain stimulation lead trajectories on radiofrequency heating during MRI at 3T: from phantom experiments to clinical implementation

Comparative Study of RF Heating in Deep Brain Stimulation Devices During MRI at 1.5 T and 0.55 T: Challenging the Assumption of Safety at Low Field Strengths

Wirelessly interfacing sensor-equipped implants and MR scanners for improved safety and imaging

Investigation of Artifacts and Optimization in Proton Resonance Frequency Thermometry Towards Heating Risk Monitoring of Implantable Medical Devices in Magnetic Resonance Imaging.

Open-bore vertical MRI scanners generate significantly less RF heating around deep brain stimulation leads compared to horizontal scanners

Temperature Measurements in the Vicinity of Human Intracranial EEG Electrodes Exposed to Body-Coil RF for MRI at 1.5T

Electromagnetic Modeling of the Implantable Electrode for Transfer Function Calibration in MRI RF-Induced Heating Assessment

Impact of Patient Postures on the RF-Induced Heating for the Active Implantable Medical Device (AIMD) at 1.5T MRI

An automated computational tool to study MRI safety of implanted passive cardiovascular medical devices

Numerical investigations of MRI RF field induced heating for external fixation devices

Design of multi-row parallel-transmit coil arrays for enhanced SAR efficiency with deep brain electrodes at 3T: an electromagnetic simulation study

Safety Study of Implant Wearers in MRI RF Field Environment

A Study on the Feasibility of the Deep Brain Stimulation (DBS) Electrode Localization Based on Scalp Electric Potential Recordings

Feasibility of Using Toroidal Transceivers for Acquiring Intraoperative MR Images Around Deep Brain Stimulation Electrodes

Safety evaluation of a new setup for transcranial electric stimulation during magnetic resonance imaging

Measuring radiofrequency field-induced temperature variations in brain MRI exams with motion compensated MR thermometry and field monitoring

Automatic Reconstruction of Deep Brain Stimulation Lead Trajectories From CT Images Using Tracking and Morphological Analysis

Impact of MRI RF coil design on the RF-induced heating of medical implants: fixed B1+ rms exposure vs normal operating mode