Abstract:In this letter, a group of laterally coupled alternating thickness (LCAT) mode resonators based on 12% scandium-doped aluminum nitride (Sc0.12Al0.88N) are reported. The LCAT mode resonators are realized in-house by sandwiching a layer of 1-<inline-formula> <tex-math notation="LaTeX">$ {\mu }\text{m}$ </tex-math></inline-formula>-thick Sc0.12Al0.88N between the top two sets and the bottom two sets of interdigitated electrode (IDE) fingers, all made of molybdenum (Mo). The experimental results show that an effective electromechanical coupling coefficient (<inline-formula> <tex-math notation="LaTeX">$ {k}_{{\text {eff}}}^{{2}}$ </tex-math></inline-formula>) of more than 10% and loaded quality factors (<inline-formula> <tex-math notation="LaTeX">$ {Q}_{ {L}}$ </tex-math></inline-formula>) as high as 870 are obtained, while the motional resistance of the resonators is kept as low as 0.68 <inline-formula> <tex-math notation="LaTeX">$ {\Omega }$ </tex-math></inline-formula>. The figure-of-merit (FoM) which is defined as <inline-formula> <tex-math notation="LaTeX">$ {k}_{{\text {eff}}}^{{2}}~{Q}_{L}$ </tex-math></inline-formula> and phase velocity (<inline-formula> <tex-math notation="LaTeX">$ {v}_{ {p}}$ </tex-math></inline-formula>) is subsequently derived to be 87 and 7840 m/s, respectively. By changing the pitch of the IDE fingers, the resonators can operate from 1.96 GHz to 2.11 GHz without significant perturbation to their performance, corresponding to a lithographic frequency tuning range of 7.5%. In addition, clean spectra without any spurious modes are obtained within a 1-GHz frequency range for all fabricated devices of various pitches, making a significant step forward in the commercialization path of the reported resonators in the applications of the high-band selection filters integrated on a single chip for mobile communication.

Over 10% of ${k}_{\text{eff}}^{{2}}$ Demonstrated by 2-GHz Spurious Mode-Free Sc0.12Al0.88N Laterally Coupled Alternating Thickness Mode Resonators

AlScN-Based Dual-Mode Devices With Temperature Compensated Strategy and Process Optimization

AlN/ScAlN composite films-based spurious free A1 mode lamb wave resonator with adjustable effective electromechanical coupling coefficient

Study on the impact of the resonant cavity and lateral acoustic edge reflector for AlSc 0.095 N-based S0 mode Lamb-wave resonators

AlN/Al0.8Sc0.2N film S0 mode lamb wave resonator with spurious mode suppression

ScAlN-on-SiC Ku-Band Solidly-Mounted Bidimensional Mode Resonators

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

Complementary-Switchable Dual-Mode SHF Scandium-Aluminum Nitride BAW Resonator

Spurious-Free S1 Mode AlN/ScAlN-Based Lamb Wave Resonator With Trapezoidal Electrodes

A 5.3 GHz Al0.76Sc0.24N Two-Dimensional Resonant Rods Resonator with a kt2 of 23.9%

Adjustable effective electromechanical coupling of Lamb wave resonator using AlN/Sc0.096Al0.904N composite films

High performance SAW resonator with spurious mode suppression using double-layer electrode transverse modulation

High Electromechanical Coupling Factor Lamb Wave Resonator

LITHIUM NIOBATE THIN FILM BASED A1 MODE RESONATORS WITH FREQUENCY UP TO 16 GHZ AND ELECTROMECHANICAL COUPLING FACTOR NEAR 35%

2-16 GHz Multifrequency X-Cut Lithium Niobate NEMS Resonators on a Single Chip

Rayleigh Wave Suppression in Al0.6Sc0.4N-on-SiC Resonators

Aln Checker-Mode Resonators With Routing Structures

Ultra flexible pseudo-lamb wave RF resonators based on ZnO/PI and AlN/PI structures

Near 6 GHz Sezawa Mode Surface Acoustic Wave Resonators using AlScN on SiC

High Figure-of-Merit A1-Mode Lamb Wave Resonators Operating Around 6 GHz Based on the LiNbO3 Thin Film

1.05-GHz CMOS oscillator based on lateral- field-excited piezoelectric AlN contour- mode MEMS resonators