Abstract:The supercritical CO2 Brayton cycle (S-CO2 BC) has attracted increasing attention because of the advantages of high efficiency, better compatibility, and safety, and to further improve the power density, turbine alternator compressor (TAC) integrated high-speed permanent magnet synchronous machine (HPMSM) sets are usually used in S-CO2 BC power generation devices. In terms of safe operation, it is of great significance to accurately and quickly obtain the temperature in the coupling state of the machine and magnetic bearings. Taking a 40000rpm HPMSM set used in S-CO2 BC power generation devices as an example, a new equivalent thermal model of winding is proposed firstly, and the temperature difference between the equivalent model and the exact model is less than 1.7%. On this basis, the lumped parameter thermal network (LPTN) model of the HPMSM set under the coupling state of the machine and magnetic bearings in totally enclosed environment is established. Finally, the steady and transient temperature results of the HPMSM set are obtained, which are verified by computational fluid dynamics (CFD) method. The range of absolute temperature error between LPTN model and CFD model is 0.2°C~2.2°C in steady state, and the relative temperature error is less than 4.2% in transient state. Furthermore, the computational efficiency of LPTN model is greatly improved compared with CFD model. The research of this paper is of great significance to temperature analysis and prediction under the coupling state of machine and magnetic bearings.

Temperature Profile Measurements During Heat Treatment of BSCCO 2212 Coils

Study of AC Loss and Temperature Distribution of a BSCCO Coil Cooled in Liquid Nitrogen or Using a Cryocooler

Thermomechanical Behavior of the HL-LHC 11 Tesla Nb3Sn Magnet Coil Constituents during Reaction Heat Treatment

TEM Study on Amorphous Phase at the Initial Stage of Heat-Treatment of BSCCO Tapes

Thermal Modeling and Analysis of a HPMSM Coupling With Magnetic Bearings

Influence of Isothermal Heating on the Curie Temperature of FeCoB Bulk Amorphous Alloy

Development of a 400 M YBCO Racetrack Coil for HTS Machine Applications

Test and Analysis of Electromagnetic and Mechanical Properties of HTS Coil During Quench State

Low Temperature Thermal Transport in High Temperature Superconducting BSCCO via Y-doped Insulating Analogue

A Real-time Monitoring System for Investigating Electromagnetic Behaviors of An HTS Coil

Two Quenched Models for High-Temperature Superconducting Insulated Coils

The study of multiple thermal cycle of HTS YBCO bulk

Conceptual Design of a HTS CICC Coil for Fusion Devices based on Bi-2223 Tapes

Transversal Thermal Conductivity of HTS Tapes: Analytical Method vs Measurements

The Heat Transfer Model of Oriented Silicon Steel Coil in Annular Furnace during the Heating Stage of High‐Temperature Annealing

The experimental research and analysis on the quench propagation of YBCO coated conductor and coil

Analysis of experimental conditions for simultaneous measurements of transport and magnetotransport coefficients of high temperature superconductors

Nanodomain Structure and Function in HTSC

Advances in XRD Characterization of 2G HTS Wire for Low-Temperature Magnet Applications

Temperature effects in Co-based amorphous wires

Two-Dimensional Anisotropic Model of YBCO Coated Conductors