Abstract:AC loss presents a significant challenge for high-temperature superconducting (HTS) rotating machines. To date, the behaviour of total AC loss (Qtol) (with current) and magnetization loss (Qm) (without current) in a single HTS tape under rotating magnetic fields (RF) have been explored. However, a research gap remains in understanding how these findings translate to the more complex HTS windings of rotating machines. Further exploration is needed to understand the loss behaviour of more complex HTS structures, such as HTS stacks. In this work, Qtol and Qm, in the HTS stacks under RF and a perpendicular AC standing wave magnetic field are numerically investigated. Two different RF models are considered: one is the Uni-RF model, characterized by a uniform field with equal field amplitudes and phases at each position, and the other is a non-uniform field created by a rotating Halbach array, referred to as the Hal-RF model. The dependence of AC loss on parameters such as the number of tapes in the stacks, tape width (2a), and the inclination angle (alpha) of tapes, which refers to the angle between the normal direction of the stack and the vertical direction, have been explored. The number of tapes in the stacks ranges from 1 to 16, alpha ranges from 0 degrees to 90 degrees, and the tape width includes 4 mm and 40 mm. Additionally, different rotating field directions are also considered. Interestingly, the analytical values from Brandt and Indenbom equation for Qm of a superconducting strip (BI-strip) are close to Qm results of the stacks under the standing wave at high fields, while they are over twice as high as those in the Hal-RF model at 1 T. This suggests the BI-strip equation is not reliable for predicting Qm under RF at high fields. We also show in the Hal-RF model that different rotation directions of the field lead to varying Qm and Qtol when asymmetric Jc (B, theta) data are applied. Moreover, it has been observed that the inclination angle has no impact on Qm under uniform RF while significantly impacts both Qm and Qtol in the Hal-RF model.

Transversal Thermal Conductivity of HTS Tapes: Analytical Method vs Measurements

A Method for Continuous Measurement of Critical Current of HTS Tapes Using Magnetic Circuits

Design for In-Field Critical Current Measurement System With 102 Mm 15 T Background Magnet

Magnetic Field and Temperature Scaling of the Critical Current of REBCO Tapes

Comparative study of current carrying capacity between 1G and 2G HTS tape samples at different temperatures and magnetic fields

Continuous Critical Current Measurement of High-Temperature Superconductor Tapes with Magnetic Substrates Using Magnetic-Circuit Method.

Examination and Analysis of Critical Current Uniformity of Long HTS Tapes by the MCorder

A Pulsed Current Inductive Method and Its Applications for Continuous Measurement of the Critical Current of Long Superconducting Tapes.

Comparison of Levitation Properties between Bulk High-Temperature Superconductor Blocks and High-Temperature Superconductor Tape Stacks Prepared from Commercial Coated Conductors

Experimental study on the an-isotropic critical current of REBCO tape

Theoretical and experimental study of AC loss in HTS single pancake coils

Determination of I-V Curves of HTS Tapes From The Frequency Dependent AC Transport Loss

Analysis of experimental conditions for simultaneous measurements of transport and magnetotransport coefficients of high temperature superconductors

Numerical Simulations on the AC Loss of REBCO Stacks under Rotating Magnetic Fields

Self-consistent Modeling of the $I_c$ of HTS Devices: How Accurate do Models Really Need to Be?

Thermal Conductivity Measurement of the Epoxies and Composite Material for Low Temperature Superconducting Magnet Design

Influence of the voltage taps position on the self-field DC and AC transport characterization of HTS superconducting tapes

Interfilament Resistance at 77 K in Striated HTS Coated Conductors

ANALYSIS OF A CONDUCTION-COOLED HTS MAGNET

Thermal degradation analysis and optimization of controlled heat treatment for stacked high temperature superconducting tapes

EXPERIMENTAL MEASUREMENT AND ANALYSIS ON ANISOTROPY CHARACTERISTIC OF THE CRITICAL CURRENT IN Bi-2223/Ag HTS TAPES