Abstract:Since many applications of YBCO tapes operate in external magnetic fields, it is necessary to investigate the magneto-angular dependence of critical current and n -values in coated conductors. In this paper, five commercial YBCO tapes with different microstructures produced by three different manufacturers are chosen. The selected samples have a width of 2.0, 4.0, 4.8, 6.0 or 12 mm, with copper, brass or stainless steel laminations. The critical current density dependence J c ( B , θ ) and n -values characteristics n ( B , θ ) of the tapes are comprehensively measured under various magnetic fields and orientations. Afterwards, the obtained experimental data sets are successfully fitted using a novel multi-objective model which considers the material anisotropy. By using this approach, a fitting function I c ( B , θ ) can always be obtained to accurately describe the experimental data, regardless of the fabrication and width differences of the superconducting tapes. Moreover, our experiment shows that when subject to different external magnetic fields, the angular dependence of n -values characteristics is directly correlated with the corresponding critical current profiles. Our results are helpful to predict the critical current of electromagnetically interacting 2G HTS wires, thereby improving the design and performance of the devices made from YBCO tapes.

Comparative study of current carrying capacity between 1G and 2G HTS tape samples at different temperatures and magnetic fields

Critical current measurement and experimental comparison of 1 G and 2 G HTS tapes

Experimental Research on Critical Current Behavior of Various Commercial HTS Tapes

Investigation and Comparison of Critical Current on Magnetic and Nonmagnetic HTS Tape under Controllable Current Ramp Rate

Investigation of Critical Current on Magnetic and Non-magnetic HTS Tape

Study of Critical Current and N-Values of 2G HTS Tapes: Their Magnetic Field-Angular Dependence

Experimental study on I c anisotropy of 2nd generation HTS tape

Detecting and Describing the Inhomogeneity of Critical Current in Practical Long HTS Tapes Using Contact-Free Method

Characterization Analysis of HTS 2G Stacked Tapes and YBCO Bulk

Examination and Analysis of Critical Current Uniformity of Long HTS Tapes by the MCorder

EXPERIMENTAL STUDY ON CRITICAL CURRENT ANISOTROPY OF HTS TAPES UNDER DC MAGNETIC FIELD

Study of Method of Measuring and Determining HTS Coil's Critical Current with $V$– $I$ Properties Between Different Parts of the Coil

AC Current Carrying Property of High-$T_{c}$ Superconducting Tapes and Its Magnetic Field Dependence

Critical current of HTS tape under tensile stress

Analysis of Overcurrent Performance of YBCO Tape Considering Different Heat Exchange Conductions

Current Distribution in High-Tc Composite Tapes

Experimental study on the an-isotropic critical current of REBCO tape

Experimental Study on AC Loss of 1G and 2G HTS Coils with an Identical Structure, Geometry and Number of Turns

Failure Analysis of YBCO Tapes Considering the Amplitude and Duration of Sinusoidal Overcurrent

Comparison study of cable geometries and superconducting tape layouts for high-temperature superconductor cables

Research and development of high Tc superconducting tapes