Abstract:Dynamic resistance, which occurs when a HTS coated conductor carries a DC current under an AC magnetic field, can have critical implications for the design of HTS machines. Here, we report measurements of dynamic resistance in a commercially available SuperPower 4 mm-wide YBCO coated conductor, carrying a DC current under an applied AC magnetic field of arbitrary orientation. The reduced DC current, I t/I c0, ranged from 0.01 to 0.9, where I t is the DC current level and I c0 is the self-field critical current of the conductor. The field angle (the angle between the magnetic field and the normal vector of the conductor wide-face) was varied between 0° and 90° at intervals of 10°. We show that the effective width of the conductor under study is ~12% less than the physical wire width, and we attribute this difference to edge damage of the wire during or after manufacture. We then examine the measured dynamic resistance of this wire under perpendicular applied fields at very low DC current levels. In this regime we find that the threshold field, B th, of the conductor is well described by the nonlinear equation of Mikitik and Brandt. However, this model consistently underestimates the threshold field at higher current levels. As such, the dynamic resistance in a coated conductor under perpendicular magnetic fields is best described using two different equations for each of the low and high DC current regimes, respectively. At low DC currents where I t/I c0 ≤ 0.1, the nonlinear relationship of Mikitik and Brandt provides the closest agreement with experimental data. However, in the higher current regime where I t/I c0 ≥ 0.2, closer agreement is obtained using a simple linear expression which assumes a current-independent penetration field. We further show that for the conductor studied here, the measured dynamic resistance at different field angles is dominated by the perpendicular magnetic field component, with negligible contribution from the parallel component. Our findings now enable the dynamic resistance of a single conductor to be analytically determined for a very wide range of DC currents and at all applied field angles.

Advances in XRD Characterization of 2G HTS Wire for Low-Temperature Magnet Applications

Tuning of magnetocaloric effect and optimization of scaling factor for Gd 55 Ni 10 Co 35 amorphous microwires

Improving Mechanical and Magnetocaloric Responses of Amorphous Melt-Extracted Gd-based Microwires Via Nanocrystallization

Thermal Analysis of a Toroidal Field Model Magnet with HTS Wires

Stability Of Properties On Magnetic Ribbon And Cores With Domestic Fe-Based Amorphous Alloy For Hts Amdt

Mechanical And Magnetocaloric Properties Of Gd-Based Amorphous Microwires Fabricated By Melt-Extraction

Comparative Study on Magnetic Properties and Microstructure of As-prepared and Alternating Current Joule Annealed Wires

High-Performance YBCO-Coated Superconductor Wires

National Round Robin Test (RRT) for Delamination Strength Testing YBCO HTS Wires at Room Temperature (RT) and 77K

The Technology of Fabrication & Application of Bi-2223 HTS Wires at InnoST

Development of HTS BSCCO Wire for Power Applications

Critical Current Degradation in Hts Wires Due to Cyclic Mechanical Strain

Impact tension behavior of heavy-drawn nanocrystalline CoCrNi medium entropy alloy wire

Comparative study on the critical current performance of Bi-2223/Ag and YBCO wires in low magnetic fields at liquid nitrogen temperature

R&D of Applied Superconductivity by a Small Business: Experiences and Future Perspective

Probing of the internal damage morphology in multilayered high-temperature superconducting wires

Dynamic resistance measurement in a YBCO wire under perpendicular magnetic field at various operating temperatures

The dynamic resistance of YBCO coated conductor wire: effect of DC current magnitude and applied field orientation

In-situ High-Energy X-ray Diffraction Study of the Early-Stage Decomposition in 2:17-Type Sm-Co-based Permanent Magnets

Development of Testing Device for Critical Current Measurements for HTS/LTS

Exfoliated YBCO filaments for second-generation superconducting cable