Abstract:The development of new composite fillers is crucial for joining ceramics or ceramics to metals because the composite fillers exhibit more advantages than traditional brazing filler metal. In this research, novel B4C reinforced Ag–Cu–Ti composite filler was developed to braze SiC ceramics. The interfacial microstructure of the joints was characterized by scanning electron microscope (SEM), X-ray diffraction (XRD) and transmission electron microscopy (TEM). The effect of B4C addition and brazing temperature on the microstructure evolution and mechanical properties of the joints was analyzed. The results revealed that TiB whisker and TiC particles were simultaneously synthesized in the Ag-based solid solution and Cu-based solid solution due to the addition of B4C particles. As the brazing temperature increased, the thickness of Ti3SiC2+Ti5Si3 layers adjacent to SiC ceramic increased. Desirable microstructure similar to the metal matrix reinforced by TiB whisker and TiC particles could be obtained at brazing temperature of 950°C. The maximum bending strength of 140MPa was reached when the joints brazed at 950°C for 10min, which was 48MPa (~52%) higher than that of the joints brazed using Ag–Cu–Ti filler.

Flash brazing of SiC using Ag-Cu-Ti alloy at ultra-low temperature in air via electric field assistance

Achieving SiC Joints with Outstanding High-Temperature Property Via Flash Brazing Using FeCoCrNiCu High-Entropy Alloy

Brazing of Ti-coated SiC Using a CoFeCrNiCu High Entropy Alloy Filler Via Electric Field-Assisted Sintering

Flash Joining of SiC at Ultra-Low Temperature

Joining of SiC using CoFeCrNiCuTi high entropy alloy filler by electric current field assisted sintering

Interfacial Microstructure and Mechanical Properties of SiC Joints Achieved by Reactive Air Brazing Using Ag-V2O5 Filler

Microstructure and Shear Strength of SiC Joint Brazed with LiAlSiO4 Reinforced AgCuTi Composite Filler

Interfacial Microstructure and Mechanical Properties of Pressureless Sintered SiC Ceramic and Stainless Steel Joints Brazed by AgCu/AgCuTi Alloy

Ultrafast High-Temperature Joining of Ti3SiC2 Using FeCoCrNiCu High-Entropy Alloy Via Thermal Shock

Wetting of Si–14Ti Alloy on SiCf/SiC and C/C Composites and Their Brazed Joint at High Temperatures

Brazing of SiC Ceramics Pretreated by Chromium Coating Using Inactive AgCu Filler Metal

Reaction mechanism and mechanical properties of SiC joint brazed by in-situ formation of Ti3SiC2

Interfacial Microstructure and Mechanical Property of ZrC-SiC Ceramic and Ti6Al4V Joint Brazed with AgCuTi Alloy

Microstructure and properties of an Al–Ti–Cu–Si brazing alloy for SiC–metal joining

Interface microstructure and mechanism of SiC ceramic vacuum brazed joint

Microstructural Evolution and Mechanical Properties of the Joint of TiAl Alloys and C/SiC Composites Vacuum Brazed with Ag–Cu Filler Metal

Microstructure of high temperature Ti-based brazing alloys and wettability on SiC ceramic

Brazing Tc4 Alloy to Si3n4 Ceramic Using Nano-Si3n4 Reinforced Agcu Composite Filler

Effect of Brazing Parameters on the Microstructure and Properties of SiC Ceramic Joint with Zr-Cu Filler Metal

Brazing SiC Ceramic Using Novel B4C Reinforced Ag–Cu–Ti Composite Filler

Microstructure and Strength of the SiC/TiAl Joint Brazed with Ag-Cu-Ti Filler Metal