Abstract:The Si3N4‐MoSi2/Ag‐Cu‐Ti/Nb new brazing system is first investigated. A composite layer containing Mo5Si3, TiN, and Ti5Si3 favors the sound joint, whose thickness is reduced to strengthen interface bonding by adding MoSi2p to the filler. The microstructure is refined and the seam is reinforced via in situ reaction of the dispersed MoSi2p with Ti atoms. MoSi2 particle (MoSi2p), the component of Si3N4‐MoSi2 composites, is added into an AgCuTi filler to strengthen the interface bonding without bringing new elements into the Nb/Si3N4‐MoSi2 brazed joint. In this new brazing system, microstructure evolution and strength of Nb/Si3N4‐MoSi2 joints as a function of brazing temperature and holding time, as well as MoSi2p content, are investigated. With an AgCuTi filler, the reaction of active Ti and Si3N4‐MoSi2 forms a composite layer consisting of Mo5Si3, TiN, and Ti5Si3 at the interface. The extensive growth of the layer is observed from 1.9 μm at 860 °C to 5.0 μm at 920 °C, and from 1.3 μm for 5 min to 4.6 μm for 20 min as the chemical reactions between Ti and Si3N4‐MoSi2 are more sufficient. Adding 6 wt% MoSi2p to the filler, the joints exhibit a peak shear strength of 154 MPa, an increase of 20% over that of a commercial AgCuTi filler, with the fracture path changing from the Si3N4‐MoSi2 to the brazing seam. The enhancement of the joint is attributed to the reinforcement of the seam by in situ reaction of the dispersed MoSi2p with Ti, refining the microstructure and reducing the thickness of the Mo5Si3+TiN+Ti5Si3 reaction layer.

Microstructure and mechanical properties of the joint between Si3N4 and Mo brazed by near‐eutectic Ag‐Cu‐In‐Ti filler alloy

Joint Microstructure and Performance of Brazing Si3N4‐MoSi2 Composites to Nb with AgCuTi and AgCuTi+MoSi2p Active Fillers

Microstructure and mechanical properties of Si3N4 ceramic and (TiB + Y2O3)/Ti matrix composite joints brazed with AgCu/Cu foam/AgCu multilayered filler

Improvements of the Si3N4 brazed joints with intermetallics

Microstructure and shear strength of γ-TiAl/GH536 joints brazed with Ti−Zr−Cu−Ni−Fe−Co−Mo filler alloy

Solid-Liquid State Bonding of Si3N4 Ceramics with Ceramic-Modified Brazing Alloy

Microstructural evolution and mechanical property of a SiCf/SiC composite/Ni-based superalloy joint brazed with an Au-Cu-Ti filler

Microstructure evolution and improved mechanical strength of the C/C-Mo joint by adjusting the joining temperature in a wide temperature range

Joining Si3N4 ceramic to Invar using Mo mesh and Cu foil interlayer

Microstructure and Shear Strength of SiC Joint Brazed with LiAlSiO4 Reinforced AgCuTi Composite Filler

Microstructure and properties of different carbon fiber reinforced ceramic composites brazed joint by Si-Ti alloy filler

Microstructure and shear property of high-temperature brazing of TiAl alloy and 316L stainless steel with a Ni-based amorphous filler

Microstructure and mechanical properties of Al2O3 ceramic and copper joints brazed with AgCuInTi brazing alloy

Investigations of the microstructure and mechanical properties of the Nb-Ti/Nb-Ti-Ni brazed joints

Interfacial microstructure and mechanical properties of ZTA/ZTA joints brazed with Ni-Ti filler metal

Effect of Mo addition on interfacial microstructure and mechanical property of SiC joint brazed by an Ni–Si filler

Microstructure and Mechanical Properties of Al2O3/Cu Joints Brazed with Ag–Cu–Ti+Zn Composite Fillers

Effect of brazing filler alloy composition on microstructure and mechanical properties of Nb–Ti–Co/Nb–Ti joints

Microstructure and mechanical properties of TC4 joints brazed with Ti–Zr–Cu–Sn amorphous filler alloy

Microstructure evolution and mechanical properties of TiAl/GH536 joints vacuum brazed with Ti–Zr–Cu–Ni filler metal

Effect of Ti content on microstructure and mechanical properties of SiCf/SiC composites/GH536 superalloy joints brazed with CoFeCrNiCuTi high entropy filler