Abstract:A crystalline silicon (c-Si) solar cell with a polycrystalline silicon/SiOx (poly-Si/SiOx) structure, incorporating both electron and hole contacts, is an attractive choice for achieving ideal carrier selectivity and serving as a fundamental component in high-efficiency perovskite/Si tandem and interdigitated back-contact solar cells. However, our understanding of the carrier transport mechanism of hole contacts remains limited owing to insufficient studies dedicated to its investigation. There is also a lack of comparative studies on the poly-Si/SiOx electron and hole contacts for ideal carrier-selective solar cells. Therefore, this study aims to address these knowledge gaps by exploring the relationship among microstructural evolution, dopant in-diffusion, and the resulting carrier transport mechanism in both the electron and hole contacts of poly-Si/SiOx solar cells. Electron (n+ poly-Si/SiOx/substrate)- and hole (p+ poly-Si/SiOx/substrate)-selective passivating contacts are subjected to thermal annealing. Changes in the passivation properties and carrier transport mechanisms of these contacts are investigated during thermal annealing at various temperatures. Notably, the results demonstrate that the passivation properties and carrier transport mechanisms are strongly influenced by the microstructural evolution of the poly-Si/SiOx layer stack and dopant in-diffusion. Furthermore, electron and hole contacts exhibit common behaviors regarding microstructural evolution and dopant in-diffusion. However, the hole contacts exhibit relatively inferior electrical properties overall, mainly because both the SiOx interface and the p+ poly-Si are found to be highly defective. Moreover, boron in the hole contacts diffuses deeper than phosphorus in the electron contacts, resulting in deteriorated carrier collection. The experimental results are also supported by device simulation. Based on these findings, design rules are suggested for both electron and hole contacts, such as using thicker SiOx and/or annealing the solar cell at a temperature not exceeding the critical annealing temperature of the hole contacts.

Photon Management for Silicon Solar Cells featuring Hole-Selective Molybdenum Oxide Rear Contacts: An Optical Simulation Study

Investigation in Feasibility of Molybdenum As A Back Contact Layer for Silicon Based Quantum Dot Solar Cells

MoOx Hole Collection Layer for A-Si: H Based Photovoltaic Cells

Simulation of High Efficiency Silicon Heterojunction Solar Cells with Molybdenum Oxide Carrier Selective Layer

Photon management in silicon photovoltaic cells: A critical review

TCAD Simulation Of Germanium-based Heterostructure Solar Cell employing Molybdenum Oxide as a Hole-Selective Layer

Analysis of Silicon Solar Cells With Poly-Si/SiOx Carrier-Selective Base and Emitter Contacts

Performance analysis of c-Si heterojunction solar cell with passivated transition metal oxides carrier-selective contacts

Photon Management Effects of Hybrid Nanostructures/microstructures for Organic-Silicon Heterojunction Solar Cells

Raytracing Modelling of Infrared Light Management Using Molybdenum Disulfide (MoS2) as a Back-Reflector Layer in a Silicon Heterojunction Solar Cell (SHJ)

Charge trapping and photovoltaic characteristics in monocrystalline silicon solar cells employing molybdenum oxide and copper oxide stacked hole-selective contacts

Nanophotonic Light Management for Perovskite-Silicon Tandem Solar Cells

Design Rule of Electron- and Hole-Selective Contacts for Polycrystalline Silicon-Based Passivating Contact Solar Cells

High-Work-Function Molybdenum Oxide Hole Extraction Contacts in Hybrid Organic–Inorganic Perovskite Solar Cells

Large-Area Si Solar Cells Based on Molybdenum Oxide Hole Selective Contacts

Exploring Optoelectronic‐Thermal Coupling in Perovskite Solar Cells Utilizing Varied Hole Transport Layers

Tunable Hole Selective Transport by Solution‐processed MoO3‐x Via Doping for p‐Type Crystalline Silicon Solar Cells

Efficiency limits of Perovskite Solar Cells with Transition Metal Oxides as Hole Transport Layers

Efficient Hole Transport Layers for Silicon Heterojunction Solar Cells by Surface Plasmonic Modification in MoOx/Au NPs/MoOx Stacks

Optimization of a Molybdenum Oxide Bilayer Facilitating Hole Transfer in the p/i Interface for Transparent Thin-Film Silicon Solar Cells and Modules Using Laser Scribing