Abstract:P‐type semiconductor cuprous oxide (Cu2O) offers promising optoelectronic applications such as solar cells and photodetectors owing to its considerable absorption coefficients and high carrier mobility. However, polycrystalline Cu2O films with low carrier mobility resulting from excessive grain boundaries and structure disorder fail to meet the demands for these optoelectronic applications. Here a stress‐assisted thermal oxidation method to fabricate p‐type <110>‐textured quasi‐single crystalline Cu2O (c‐Cu2O) wafers with centimeter‐scale grains is developed. It is found that strain energy induced by thermal contact stress plays a critical role in crystal growth. The resultant <110>‐textured quasi‐single c‐Cu2O wafers exhibit excellent crystallinity with rocking curve having a low full width at half maximum of 0.022°, a low defect density of 2 × 1011 cm−3, a high mobility exceeding 100 cm2 V−1 s−1, and a long minority lifetime of 98.5 µs. Such quasi‐single c‐Cu2O wafers lead to efficient solar cells with an open‐circuit voltage of 0.95 V and highly responsive photodetectors with superior cycling stability. These results indicate not only the advancement of fabricating high‐quality Cu2O wafers upon controllable methodology but also the promising optoelectronic applications using p‐type metal oxide semiconductors. Highly oriented centimetre‐scale quasi‐single crystalline cuprous oxide wafers are obtained via a novel bifacial stress‐assisted thermal oxidation method. Strain energy induced by thermal contact stress is found playing a crucial role in crystal growth. Intriguingly, heterojunction solar cells deliver an impressive open‐circuit voltage of 0.97 V and Schottky‐type photodetectors exhibit a high responsivity of 309 mA W−1 at 0 V.

Preparation of CuO films at different sputtering powers and the effect of operating temperatures on the photovoltaic characteristics of p-CuO/n-Si heterojunction

CuBi2O4/CuO Heterojunction Coated with Electrodeposited ZnO Overlayer for Stable Solar Hydrogen Evolution

An all-sputtered photovoltaic ultraviolet photodetector based on co-doped CuCrO2 and Al-doped ZnO heterojunction

Investigation of sputtering pressure on physical properties of CuO films and the electrical properties-temperature relationship of CuO films and p-CuO/n-GaN heterojunction

Advance in Cu2O-ZnO Solar Cells and Investigation of Cu2O-ZnO Heterojunction Fabricated by Magnetron Sputtering

Thermal optimization of defected Cu2O photon-absorbing layer and the steady p-Cu2O/n-Si photovoltaic application

Enhancement of Solar-to-hydrogen Conversion Efficiency in Water Splitting by Optimizing Morphology of Cu2O Nanostructure and Surface Modification

Preparation Strategies of p-Type Cuprous Oxide and Its Solar Energy Conversion Performance

Effects of DC Sputtering Power on the Properties of AZO Films Deposited at Room Temperature for CIGS Photovoltaics

CuO:Se composite films and its photovoltaic application

The preparation of CuO film under different annealing atmospheres and investigation of the excellent electrical and undoped tunable electroluminescence characteristics of Au/i-CuO/n-GaN LED

Interface Connection Modulation by Heating Treatment for Photovoltaic Performance Enhancement on CuInS2 Quantum Dot Sensitized Solar Cells

Current Status and Future Prospects of Copper Oxide Heterojunction Solar Cells

Annealing temperature induced physical characteristics of CuO films grown by magnetron sputtering

Effects of CuAlO2 on the heterojunction interface and performance of Cu2ZnSn(S,Se)4 thin-film solar cells

Study of DC Sputtered Cu2O Growth and P-Cu2o/ N-Igzo Heterojunctions

Cu2O Homojunction Solar Cells: Efficiency Enhancement with a High Short Circuit Current

Quasi‐Single Crystalline Cuprous Oxide Wafers via Stress‐Assisted Thermal Oxidation for Optoelectronic Devices

Electrodeposition of Copper Oxides as Cost-Effective Heterojunction Photoelectrode Materials for Solar Water Splitting

Preparation and first principle calculation of Cu2O thin films

The effects of deposition temperature and ambient on the physical and electrical performance of DC-sputtered n -ZnO/ p -Si heterojunction