Abstract:Cold dwell sensitivity of near α titanium alloys has posed a significant challenge to the engineering safety within the aerospace industry. However, there exists inconsistency regarding the critical facet formation mechanism between basal and prismatic nucleation. A key revelation in this paper is that the controversy surrounding the facet nucleation plane primarily arises from variations in texture: when the loading direction is parallel to the c -axis or at a 45 ° angle, it leads to basal plane cracking, whereas loading direction perpendicular to the c -axis results in prismatic plane cracking. What's more, a large anisotropy is observed in the dwell fatigue performance in descending order: rolling direction (RD) > transverse direction (TD) >45° direction. To be specific, the dwell fatigue life of RD specimens was 2 times and 4.07 times longer than that of TD and 45 ° specimens, which exhibits excellent dwell fatigue resistance. Furthermore, the high prismatic dislocation density near the facet of RD specimen was confirmed through the Transmission Electron Microscope (TEM) and Transmission Kikuchi Diffraction (TKD) map, which is evidenced that prismatic slips lead to higher strain hardening during cyclic loading. The basal plane of facet grain is generally parallel to the facet line, indicating that the elliptical facet developed by the transgranular fracture through basal plane. Twinning activation in hard grain to accommodate deformation in Ti60 alloy is firstly observed under dwell fatigue tests, which is a product of high stress level in the hard grain. This paper unveils the significant impact of texture on dwell fatigue resistance, offering novel insights into enhancing dwell fatigue performance through texture control.

Remarkable increase in high-cycle fatigue resistance in a titanium alloy with a fully lamellar microstructure

Fatigue cracking behavior and life assessment of TC11 titanium alloy in very high cycle regime at two working temperatures

The mechanism of internal fatigue-crack initiation and early growth in a titanium alloy with lamellar and equiaxed microstructure

Nacre-like surface nanolaminates enhance fatigue resistance of pure titanium

Microstructure based cracking behavior and life assessment of titanium alloy under very-high-cycle fatigue with elevated temperatures

Influence of microstructure on strain controlled low cycle fatigue crack initiation and propagation of Ti-55531 alloy

Crack nucleation and dislocation activities in titanium alloys with the strong transverse texture: insights for enhancing dwell fatigue resistance

Slip dominated planar anisotropy of low cycle fatigue behavior of commercially pure titanium

Phase Interface-Induced Dwell Fatigue Cracks in Titanium Alloy with Lamellar Microstructure

Microstructure and pore sensitivities in very high cycle fatigue behaviors of titanium alloy welded joints under stress ratios

Microstructural evolution and oxidation in α/β titanium alloy under fretting fatigue loading

Microstructural effects on the high-cycle fatigue and fracture behaviors of Ti-6Al-4V alloy

High-strength and low-dwell-sensitivity titanium alloy showing high tolerance to microcracking under dwell fatigue condition

Deformation Mechanisms of Selective Laser Melted 316l Austenitic Stainless Steel in High Temperature Low Cycle Fatigue

Crack initiation mechanism of titanium alloy in very high cycle fatigue regime at 400°C considering stress ratio effect

Dwell and Normal Cyclic Fatigue Behaviours of Ti60 Alloy

High cycle fatigue behavior of titanium microalloyed high-strength beam steels

Low-Cycle Fatigue Behavior and Fracture Characteristics of Low-Cost Ti-2Fe-0.1B Alloy

Investigation of fatigue behavior of laser powder bed fusion Ti-6Al-4V: Roles of heat treatment and microstructure

Characteristic and mechanism of crack initiation and early growth of an additively manufactured Ti-6Al-4V in very high cycle fatigue regime

Microstructure stability and damage mechanisms in an α/β Ti-6Al-4V-0.55Fe alloy during low cycle dwell-fatigue at room temperature