Abstract:The realization of an ideal combination of mechanical and fatigue properties is prerequisites for practical application of titanium (Ti) microalloyed steel in automotive field. The fatigue behavior of four Ti microalloyed high-strength beam steels with different Ti contents was systematically studied. The results show that the content of microalloying element Ti has a significant effect on the fatigue properties, especially in the steel with a high Ti content. For the experimental Ti microalloyed steel, inclusion-induced crack initiation is the main fatigue failure mode. Different from general fatigue fracture mechanism in Ti-contained steel, no TiN, which is the most detrimental to fatigue behavior, was found in fatigue crack initiation area. However, the large-sized TiN and oxide complex inclusion with a core–shell structure is the dominant cause of fatigue fracture. Because of the intense-localized deformation at the interface between complex inclusion and matrix, the angular TiN in the outer shell has a serious deteriorating effect on the fatigue properties, which is consistent with the result of the Kernel average misorientation map. Besides, the modification effect of a small amount of MnS on large-sized inclusion is not obvious and has little effect on the fatigue behavior. For more practical guidance, the critical inclusion sizes of the experimental steels were also investigated by experimental extrapolation method. With the increasing tensile strength, the inclusion sensitivity of the experimental steels increases, leading to the small critical inclusion size.

High cycle fatigue behavior of titanium microalloyed high-strength beam steels

Effect of Mg on Inclusion and High Cycle Fatigue Behavior in Titanium Microalloyed Beam Steel

Study on the high cycle fatigue behavior of titanium microalloyed high strength beam steel by magnesium treatment

Study on Micro-Mechanism of Crack Initiation and Propagation Induced by Inclusion in Ultra-High Strength Steel

Fatigue crack initiation and competitive crack propagation behavior in 500 MPa grade automobile beam steel

Effect of Ti on Microstructure and Mechanical Properties of Die-Cast Al-Mg-Zn-Si Alloy

Effect Of Microstructure On The High-Cycle Fatigue Behavior Of Ti(43-44)Al4nb1mo (Tnm) Alloys

Effects of three stress levels on the fatigue properties and fracture mechanisms of an in-situ synthesized TiB/Ti-6Al-4V titanium matrix composite

Progress in Understanding the Fatigue Behavior of Ti Alloys

High-cycle Fatigue of a Titanium Alloy: the Role of Microstructure in Slip Irreversibility and Crack Initiation

Microstructural effects on the high-cycle fatigue and fracture behaviors of Ti-6Al-4V alloy

High Cycle Fatigue Behavior of the In-Situ TiB2/7050 Composite

Α-Lamella Orientation Dependence of Fatigue Crack Propagation in As-Forged TiB/near Α-Ti Composite

High fatigue performance and microscopic mechanisms of in-situ TiB 2 /7050Al composite at different temperatures

Fatigue Crack-Initiation Mechanisms of a Dual-Phase Titanium Alloy Exhibiting High Tensile and High-Cycle Fatigue Properties

Microstructure and pore sensitivities in very high cycle fatigue behaviors of titanium alloy welded joints under stress ratios

Local Strain Accumulation in Fatigue Crack Propagation Process of Ti‐6Al‐4V Alloy

Microstructure based cracking behavior and life assessment of titanium alloy under very-high-cycle fatigue with elevated temperatures

Biomedical core–shell micro-nanocrystalline Ti6Al4V5Cu alloy with high fatigue properties

Effect of Microstructure on Ultra-High Cycle Fatigue Behavior of Ti–6Al–4V

Stress-sensitive fatigue crack initiation mechanisms of coated titanium alloy