Abstract:The realization of an ideal combination of mechanical and fatigue properties is prerequisites for practical application of titanium (Ti) microalloyed steel in automotive field. The fatigue behavior of four Ti microalloyed high-strength beam steels with different Ti contents was systematically studied. The results show that the content of microalloying element Ti has a significant effect on the fatigue properties, especially in the steel with a high Ti content. For the experimental Ti microalloyed steel, inclusion-induced crack initiation is the main fatigue failure mode. Different from general fatigue fracture mechanism in Ti-contained steel, no TiN, which is the most detrimental to fatigue behavior, was found in fatigue crack initiation area. However, the large-sized TiN and oxide complex inclusion with a core–shell structure is the dominant cause of fatigue fracture. Because of the intense-localized deformation at the interface between complex inclusion and matrix, the angular TiN in the outer shell has a serious deteriorating effect on the fatigue properties, which is consistent with the result of the Kernel average misorientation map. Besides, the modification effect of a small amount of MnS on large-sized inclusion is not obvious and has little effect on the fatigue behavior. For more practical guidance, the critical inclusion sizes of the experimental steels were also investigated by experimental extrapolation method. With the increasing tensile strength, the inclusion sensitivity of the experimental steels increases, leading to the small critical inclusion size.

Microstructural effects on the high-cycle fatigue and fracture behaviors of Ti-6Al-4V alloy

Effects of Tensile/compressive Overloads on Fatigue Crack Growth Behavior of an Extra-Low-interstitial Titanium Alloy

A Study of the Back Stress and the Friction Stress Behaviors of Ti-6Al-4V Alloy During Low Cycle Fatigue at Room Temperature

The Effect of Microstructure on the Very High Cycle Fatigue Behavior of Ti-6Al-4V Alloy

Microstructure stability and damage mechanisms in an α/β Ti-6Al-4V-0.55Fe alloy during low cycle dwell-fatigue at room temperature

Microstructure based cracking behavior and life assessment of titanium alloy under very-high-cycle fatigue with elevated temperatures

Fatigue cracking behavior and life assessment of TC11 titanium alloy in very high cycle regime at two working temperatures

Effect of thermal exposure on the microstructure and mechanical properties of Ti60 alloy

Fatigue Crack Growth Behavior of Beta-Annealed Ti–6Al–2Sn–4Zr–xMo (x = 2, 4 and 6) Alloys: Influence of Microstructure and Stress Ratio

High cycle fatigue behavior of additively manufactured Ti-6Al-4V alloy with HIP treatment at elevated temperatures

Fatigue Failure Analyses On A Ti-45al-8nb-0.2w-0.2b-0.1y Alloy At Different Temperatures

Effect of Oxygen Variation on High Cycle Fatigue Behavior of Ti-6Al-4V Titanium Alloy

High fatigue performance and microscopic mechanisms of in-situ TiB 2 /7050Al composite at different temperatures

Effects of aging temperature on microstructure and high cycle fatigue performance of 7075 aluminum alloy

Fracture mechanism of Ti60 alloy at high temperature in very high cycle fatigue regime and fatigue life prediction

High cycle fatigue behavior of titanium microalloyed high-strength beam steels

The Effect of Microstructure and Axial Tension on Three-Point Bending Fatigue Behavior of TC4 in High Cycle and Very High Cycle Regimes

Influence of microstructure on strain controlled low cycle fatigue crack initiation and propagation of Ti-55531 alloy

Characteristic and mechanism of crack initiation and early growth of an additively manufactured Ti-6Al-4V in very high cycle fatigue regime

Effect of elevated temperature on high-cycle and very-high-cycle fatigue properties of Ni-based superalloy manufactured by selective laser melting

Effects of three stress levels on the fatigue properties and fracture mechanisms of an in-situ synthesized TiB/Ti-6Al-4V titanium matrix composite