Abstract:Load shedding under cold dwell fatigue in titanium alloys has been a threat to the safety of the aero-engine since it is responsible for crack formation. The strain incompatibility between the soft-hard grain pair arises from the significant creep in the soft grain during the dwell period, which is fundamentally related to the load shedding. Such deformational heterogeneity is not only affected by the soft-hard grain itself but also by its neighboring grains, but the effect of the latter is rarely reported. In this paper, the effect of neighboring grains, including location, crystal orientation, texture, etc., on load shedding is quantitatively investigated using a three-dimensional rate-dependent crystal plasticity model by controlling the microstructural morphology of the grains. In particular, the mechanism that the dwell fatigue cracks tend to nucleate from the sample's interior rather than the free surface is revealed. Restriction of rigid body rotation from neighboring grains can further enhance load shedding. The crystal orientation of individual and group neighboring grains sitting at different locations with respect to the soft-hard grain pair is evaluated. The grain directly attached to the hard grain has the strongest influence. The statistics of load shedding are analyzed by conducting hundreds of simulations with different textures. Stronger textures are found to be able to enhance load shedding and thus deteriorate the service lifetime. The change of locations showing the highest stress during the dwell period arising from plastic deformation in neighboring grain may lead to the phenomenon of reverse load shedding. Understanding the neighboring grain effects from both the mechanistic basis and the statistical point of view is important in integrity evaluations and service life assessments of titanium components in aero-engines.

The mechanism of internal fatigue-crack initiation and early growth in a titanium alloy with lamellar and equiaxed microstructure

High-cycle Fatigue of a Titanium Alloy: the Role of Microstructure in Slip Irreversibility and Crack Initiation

Low-cycle Fatigue Behavior and Property of TA15 Titanium Alloy with Tri-Modal Microstructure

Cyclic Deformation and Microcrack Initiation During Stress Controlled High Cycle Fatigue of a Titanium Alloy

Fatigue cracking behavior and life assessment of TC11 titanium alloy in very high cycle regime at two working temperatures

Crack initiation mechanism of titanium alloy in very high cycle fatigue regime at 400°C considering stress ratio effect

Fatigue Crack-Initiation Mechanisms of a Dual-Phase Titanium Alloy Exhibiting High Tensile and High-Cycle Fatigue Properties

Crack Initiation Mechanism in a High-Strength Ti-5Al-7.5V Alloy Subjected to High Cycle Fatigue Loading

Microstructure-based Interior Cracking Behavior of Α + Β Titanium Alloy under Two Stress Ratios and Intermediate Temperature in the Very High-Cycle Fatigue Regime

High Cycle Fatigue Behavior of Ti–5Al–5Mo–5V–3Cr–1Zr Titanium Alloy with Bimodal Microstructure

Crystallographic Micro-Mechanism of Faceted Crack Initiation in Near-Α Titanium Alloy Ti6321 under Room-Temperature Fatigue and Dwell Fatigue Loadings

Crack Initiation Mechanisms under Two Stress Ratios Up to Very-High-cycle Fatigue Regime for a Selective Laser Melted Ti-6Al-4V

Low-cycle Fatigue Behavior and Life Prediction of TA15 Titanium Alloy by Crystal Plasticity-Based Modelling

Fatigue Crack Growth of TC17 Titanium Alloy with Three Microstructures

Investigation of Neighboring Grain Effects on Load Shedding in Titanium Alloys under Cold Dwell Fatigue

Characteristic and mechanism of crack initiation and early growth of an additively manufactured Ti-6Al-4V in very high cycle fatigue regime

Fatigue Voids and Sub-Grain Boundaries Assisted Crack Initiation with High Stress Ratio in Vhcf Regime for Titanium Alloy at 400℃

Creep-fatigue Voids and Sub-Grain Boundaries Assisted Crack Initiation for Titanium Alloy in VHCF Regime with High Mean Stress at 400°C

Microstructure based cracking behavior and life assessment of titanium alloy under very-high-cycle fatigue with elevated temperatures

Crack Initiation and Early Growth Behavior of TC4 Titanium Alloy under High Cycle Fatigue and Very High Cycle Fatigue

Comparison of Fatigue Crack Initiation Behavior in Different Microstructures of TC21 Titanium Alloy