Abstract:The presence of oxide-MnS complex inclusions is beneficial for the improvement of hydrogen resistance in pipeline steel. The effect of S and Mg contents on the generation mechanism of MnS, MgAl 2 O 4 , and MgO inclusions, and the heterogeneous nucleation principle of MnS on the surfaces of MgAl 2 O 4 and MgO were revealed using laboratory experiments, thermodynamic calculations, and density functional theory (DFT) computations. The inclusion characteristics in steel were evaluated by using a Scanning Electron Microscope in combination with an Energy Dispersive Spectrometer (SEM + EDS). It has been found that as the Mg content increased, MgAl 2 O 4 transformed into MgO, which can be well predicted by thermodynamic calculations. It was found that MnS exhibited the ability to nucleate heterogeneously on the surfaces of MgO and MgAl 2 O 4 inclusions. Furthermore, proper S content (approximately 30 ppm) can facilitate the formation of oxide-MnS complex inclusions, excess S content was not desired. The smaller the oxide inclusion, the easier to form wrapped MnS on the oxides. The nucleation ability of MnS and MgAl 2 O 4 was identified by DFT calculations and found that they followed the order of (111) MnS //(111) MgAl2O4 >(100) MnS //(100) MgAl2O4 >(110) MnS //(110) MgAl2O4 . Furthermore, the heterogeneous nucleation ability of MnS and MgO followed in the order of (111) MnS //(111) MgO > (100) MnS //(111) MgO > (100) MnS //(100) MgO . This study provides theoretical evidence supporting the heterogeneous nucleation ability of MnS on the surfaces of MgO and MgAl 2 O 4 . Moreover, it helps bridge the disparity between the calculation of MnS and MgO nucleation using the two-dimensional mismatch degree and the experimental findings.

Effect of sulfur content on precipitation behaviour of MnS-containing inclusions in X70 pipeline steel

Effect Of Submicron-Scale Mns Inclusions On Hydrogen Trapping And Hic Susceptibility Of X70 Pipeline Steels

Effect of Bismuth Content and Heating Rate on MnS Inclusions in Free-Cutting Steel

A thermodynamic assessment of precipitation, growth, and control of MnS inclusion in U75V heavy rail steel

In Situ Observation on the Heterogeneous Nucleation of MnS in Heavy Rail Steels with Varied Aluminum Content

In Situ Observation of Precipitation Behavior of MnS during Solidification of Steel Melt Intended for Production of Nonquenched and Tempered Steel

Insight into the Triggering Effect of (al, Mg, Ca, Mn)-oxy-sulfide Inclusions on Localized Corrosion of Weathering Steel

Interaction of MnS inclusion behaviors and macrosegregation during solidification by multi-phase modelling

The Effect of Alloying Elements on Formation and Evolution Mechanism of Manganese‐Containing Inclusions in Medium/High‐Manganese Steels

Numerical understanding of MnS precipitation influence on solute micro-segregation during solidification

Effect of Magnesium on Sulfide and Microstructure in Microalloyed Steel

Effect of Calcium Addition on Oxide and Sulfide Inclusions in Heavy Steel Ingot Simulated by Lab Experiments

Analysis of MnS Inclusions Formation in Resulphurised Steel via Modeling and Experiments

Effect of oxide inclusions on MnS precipitates and tensile mechanical property of high-strength low-alloy steel

The Effect of La, Ce Rare‐Earth Elements on the MnS Inclusion Precipitation and Distribution in U75V Heavy‐Rail Steel

Inclusion Characterization in High Strength Low Alloy Steel for Pipeline Application

First Principles and Experimental Study on the Atomic Formation of MnS–Al<sub>2</sub>SiO<sub>5</sub> Inclusions in Steel

First‐Principles Calculation and In Situ Observation on the Precipitation of Inclusions during Solidification of a High Sulfur Steel

Effect of Mg Treatment on the Evolution of Inclusions in M50 Aerospace Bearing Steel Under Different S/O Ratio Conditions

Theoretical Precipitation Modeling and Multidimensional Characterization of Sulfide Inclusions in Tellurium-Containing Steels

Effects of Inclusion Precipitation, Partition Coefficient, and Phase Transition on Microsegregation for High-Sulfur Steel Solidification