Abstract:In order to research the effect pattern of MnS inclusions on free-cutting steel, we study the microstructure evolution, the damage mechanism and the mechanical properties in free-cutting steel in the presence of MnS inclusions. Spindle shaped MnS is added as inclusions within the free-cutting steel. The mechanical properties were found to change when inclusions were present. The gained results show that the formation of voids causing fracture starts from the interface inside the matrix close to the MnS. From the point of view of nanocomposite strength, the main effect of MnS inclusions is related to stress concentration, leading to the effect of increased stresses near the interface between the interior of the matrix and the inclusions. The inclusions have lower Young's modulus and lower dislocation activity, resulting in smaller deformation of the alloy system, larger interfacial stress concentrations and earlier hole formation. The maximum strain and stress regions of the alloy also appear near the MnS inclusions, which leads to the formation of defects near the MnS inclusions and then fracture of the alloy. MnS inclusions adversely affect the tensile properties of the alloy, such as Young's modulus, yield stress and yield strain. By comparing the stress-strain curves of single crystal iron and alloy containing MnS inclusions, it is indicated that the yield strength of the latter decreases. Slip bands and dislocation lines are first generated around the MnS inclusion, and the phase transition is induced from the original single BCC structure to FCC, HCP and amorphous structures, and the atoms of FCC, HCP and amorphous structures increase with increasing strain, while those of BCC structure decrease, especially after yield strain. This study is significant for understanding the effect of inclusions on the mechanical laws and fracture mechanisms of the alloy.

Unraveling the effect of sulfide-oxide complex inclusions on the localized corrosion mechanism for carbon steel

Insight into the Triggering Effect of (al, Mg, Ca, Mn)-oxy-sulfide Inclusions on Localized Corrosion of Weathering Steel

Local corrosion characteristics of CaS/CaO–MgO–Al2O3 inclusions in low-alloy steel under multi-factor mechanisms

Dissolution kinetics of the sulfide-oxide complex inclusion and resulting localized corrosion mechanism of X70 steel in deaerated acidic environment

Localized Corrosion of Stainless Steel Triggered by Typical Inclusions in NaCl Solution: Oxy-Sulfide and MnS

Revealing the Effect of O2, SO2 and H2O in Supercritical CO2 on the Corrosion Behavior of 316L Steel at Elevated Temperature

New insights into the mechanism of localised corrosion induced by TiN-containing inclusions in high strength low alloy steel

Localized corrosion of 304 stainless steel triggered by embedded MnS

Effects of Ti and Cu Addition on Inclusion Modification and Corrosion Behavior in Simulated Coarse-Grained Heat-Affected Zone of Low-Alloy Steels

Effects of deoxidation methods on the inclusion characteristics and corrosion behaviour of high-strength low-alloy steels in marine environments

Towards a better understanding of localised corrosion induced by typical non-metallic inclusions in low-alloy steels

Thermodynamics of Complex Sulfide Inclusion Formation in Ca-Treated Al-Killed Structural Steel

Atomic Scale Understanding of the Interaction Between Alloying Copper and Mns Inclusions in Stainless Steels in Nacl Electrolyte

Effect of Calcium Addition on Oxide and Sulfide Inclusions in Heavy Steel Ingot Simulated by Lab Experiments

Initial localized corrosion induced by multiscale precipitates in the new generation high-strength Al-Zn-Mg-Cu alloy

Effect of sulfur content on precipitation behaviour of MnS-containing inclusions in X70 pipeline steel

Effect of Magnesium on Sulfide and Microstructure in Microalloyed Steel

Effect of sulfur on synergistic corrosion behavior of Q235 and 16Mn steel in sodium aluminate solution

Correlation between hyperfine structure of inclusion and localized corrosion mechanism of DSS2101 with Ce microalloying in simulated marine environment

Local Corrosion Behaviors in the Coarse-Grained Heat-Affected Zone in a Newly Developed Zr-Ti-Al-RE Deoxidized High-Strength Low-Alloy Steel

Effects of MnS inclusions on mechanical behavior and damage mechanism of free-cutting steel: A molecular dynamics study