Abstract:The presence of oxide-MnS complex inclusions is beneficial for the improvement of hydrogen resistance in pipeline steel. The effect of S and Mg contents on the generation mechanism of MnS, MgAl 2 O 4 , and MgO inclusions, and the heterogeneous nucleation principle of MnS on the surfaces of MgAl 2 O 4 and MgO were revealed using laboratory experiments, thermodynamic calculations, and density functional theory (DFT) computations. The inclusion characteristics in steel were evaluated by using a Scanning Electron Microscope in combination with an Energy Dispersive Spectrometer (SEM + EDS). It has been found that as the Mg content increased, MgAl 2 O 4 transformed into MgO, which can be well predicted by thermodynamic calculations. It was found that MnS exhibited the ability to nucleate heterogeneously on the surfaces of MgO and MgAl 2 O 4 inclusions. Furthermore, proper S content (approximately 30 ppm) can facilitate the formation of oxide-MnS complex inclusions, excess S content was not desired. The smaller the oxide inclusion, the easier to form wrapped MnS on the oxides. The nucleation ability of MnS and MgAl 2 O 4 was identified by DFT calculations and found that they followed the order of (111) MnS //(111) MgAl2O4 >(100) MnS //(100) MgAl2O4 >(110) MnS //(110) MgAl2O4 . Furthermore, the heterogeneous nucleation ability of MnS and MgO followed in the order of (111) MnS //(111) MgO > (100) MnS //(111) MgO > (100) MnS //(100) MgO . This study provides theoretical evidence supporting the heterogeneous nucleation ability of MnS on the surfaces of MgO and MgAl 2 O 4 . Moreover, it helps bridge the disparity between the calculation of MnS and MgO nucleation using the two-dimensional mismatch degree and the experimental findings.

Numerical understanding of MnS precipitation influence on solute micro-segregation during solidification

Effects of Inclusion Precipitation, Partition Coefficient, and Phase Transition on Microsegregation for High-Sulfur Steel Solidification

Analysis of MnS Inclusions Formation in Resulphurised Steel via Modeling and Experiments

The simple microsegregation model for steel considering MnS formation in the liquid and solid phases

Interaction of MnS inclusion behaviors and macrosegregation during solidification by multi-phase modelling

A thermodynamic assessment of precipitation, growth, and control of MnS inclusion in U75V heavy rail steel

In Situ Observation of Precipitation Behavior of MnS during Solidification of Steel Melt Intended for Production of Nonquenched and Tempered Steel

Study on microsegregation model and MnS precipitation behavior of continuous casting ultra-low sulfur steel slab

First‐Principles Calculation and In Situ Observation on the Precipitation of Inclusions during Solidification of a High Sulfur Steel

Effect of sulfur content on precipitation behaviour of MnS-containing inclusions in X70 pipeline steel

Critical precipitation behavior of MnTe inclusions in resulfurized steels during solidification

STUDY ON A MATHEMATICAL MODEL OF MICROSEGREGATION IN CONTINUOUSLY CAST SLAB

Finite Element Multi-scale Modeling of Chemical Segregation in Steel Solidification Taking into Account the Transport of Equiaxed Grains

Model for Inclusion Precipitation Kinetics During Solidification of Steel Applications in MnS and TiN Inclusions

Numerical Simulation of Solute Segregation Patterns for a Binary Alloy Using Phase-Field Approach

The Effect of Alloying Elements on Formation and Evolution Mechanism of Manganese‐Containing Inclusions in Medium/High‐Manganese Steels

Experimental Measurements for Numerical Simulation of Macrosegregation in a 36-Ton Steel Ingot

Study on Micro Segregation of High Alloy Fe–Mn–C–Al Steel

In Situ Observation on the Heterogeneous Nucleation of MnS in Heavy Rail Steels with Varied Aluminum Content

Study on the Mechanism of Sulfur Compound Precipitates of Non-Oriented Silicon Steel

Three-Dimensional Simulation of Macrosegregation in a 36-Ton Steel Ingot Using a Multicomponent Multiphase Model