Effect of Mo on Segregation Behavior of Al-Mg-Si-Mn Alloy Produced by Twin-Roll Casting
Xiaoming Qian,Yunfeng Wang,Longzhou Meng,Hongqun Tang,Luhan Hao,Yan Peng,Zhaodong Wang,Yong Li,Yifei Xu,Kun Liu,Jan Jezierski,Yetao Wang
DOI: https://doi.org/10.1007/s11837-024-07008-0
2024-11-26
JOM
Abstract:Segregation is a type of harmful defect, especially for strips with high alloying content aluminum alloys produced by twin-roll casting, which seriously inhibits the mechanical properties. Mo is often used for the refiner in aluminum alloys, and, in this study, the effect of Mo on the segregation behavior of Al-Mg-Si-Mn alloy produced by twin-roll casting is investigated. The results show that the addition of Mo can effectively reduce the secondary dendrite arm spacing (SDAS) and refine the solidification microstructure. More importantly, the segregation behavior in the thickness direction of the cast-rolled sheet is significantly weakened after the addition of Mo. Considering the principle of segregation formation, the secondary dendrite arm spacing in the center region decreases sharply from 33 to 16 μm, which is beneficial for more solute elements to enter the Al matrix, thus improving the redistribution coefficient of the solute elements. Therefore, in the final stage of solidification, there are fewer solute atoms in the residual liquid phase, which leads to the alleviation of segregation behavior. The research on segregation behavior in this paper is of great significance for the effective control of segregation and the preparation of high-quality aluminum alloy sheets by twin-roll casting.
materials science, multidisciplinary,metallurgy & metallurgical engineering,mining & mineral processing,mineralogy