Abstract:In order to study the effects of rare earth La–Ce alloying treatment on the characteristics of inclusions in non-oriented silicon steels, industrial experiments were conducted studying the composition, morphology, size and quantity of inclusions in W350 non-oriented silicon steel during the RH (Ruhrstahl-Hereaeus) refining process and tundish process, after rare earth treatment. The products were analyzed by means of ICP-MS (inductively coupled plasma mass spectrometry), SEM/EDS (scanning electron microscope-energy dispersive spectrometry), and ASPEX (automated SEM/EDS inclusion analysis). The research results showed that the types of inclusions in experimental steel changed significantly after rare earth treatment. The types of inclusions after RE (rare earth) treatment are typically rare earth composite inclusions that are mainly composed of (La, Ce)Al2O3, and conventional inclusions. The addition of rare earth promotes the agglomeration of inclusions; the morphologies of the inclusions are mostly blocky, and some are distributed in long strips. After rare earth treatment during the RH refining process, the number of inclusions with sizes of 1.0~3.5 μm in the experimental steel is increased, and the average size of the inclusions is 2.66 μm. In addition, the number of inclusions larger than 4 μm in the specimens increases due to the collision and growth of inclusions caused by the RH circulation. After rare earth treatment during the tundish process, the number of micro inclusions with sizes of 1.0~2.5 μm in the specimen steels decreases, while the number of inclusions larger than 5 μm increases. The size distribution of micro inclusions in hot-rolled sheets after rare earth treatment was studied using TEM (transmission electron microscopy). In the specimens without rare earth, the content of micro inclusions (≤1 μm) is 51,458.2/mm2 and the average size is 0.388 μm. In the specimens with rare earth added, the content of micro inclusions (≤1 μm) is 24,230.2/mm2 and the average size is 0.427 μm. Compared to sheet produced by the original process, the iron loss of the 0.35 mm finished experimental sheet is reduced by 0.068 W/kg, and the magnetic induction is increased by 0.007 T. The iron loss of the 0.50 mm finished experimental sheet is reduced by 0.008 W/kg, and the magnetic induction is increased by 0.004 T. After rare earth treatment, the average size of micro inclusions increases and the magnetic properties are obviously improved.

The Effect of La, Ce Rare‐Earth Elements on the MnS Inclusion Precipitation and Distribution in U75V Heavy‐Rail Steel

A thermodynamic assessment of precipitation, growth, and control of MnS inclusion in U75V heavy rail steel

Influence mechanism of rare earth (RE) on inclusion modification in non-oriented silicon steel

Study on Influence of Rare Earth Ce on Micro and Macro Properties of U75V Steel

First‐Principles Calculation and In Situ Observation on the Precipitation of Inclusions during Solidification of a High Sulfur Steel

Effect of rare earth composition on the electrochemical properties of multicomponent RENi5-xMx (M = Co, Mn, Ti) alloys

Effects of Modified Inclusions and Precipitates Alloyed by Rare Earth Element on Corrosion and Impact Properties in Low Alloy Steel

The Effect of Alloying Elements on Formation and Evolution Mechanism of Manganese‐Containing Inclusions in Medium/High‐Manganese Steels

Inclusions modification by rare earth in steel and the resulting properties: A review

Effect of Rare Earth–Magnesium Alloy on Inclusion Evolution in Industrial Production of Die Steel

Investigation on the formation mechanism of composite inclusions by multi-scale characterization in high manganese steel with yttrium addition

In Situ Observation on the Heterogeneous Nucleation of MnS in Heavy Rail Steels with Varied Aluminum Content

Effects of Rare Earth La–Ce Alloying Treatment on Modification of Inclusions and Magnetic Properties of W350 Non-Oriented Silicon Steel

Effects of Rare Earth Additions on Compound Structure and As-Annealed Properties of Cu-12%Ag

Promoting the La Solution in 2:14:1-Type Compound: Resultant Chemical Deviation and Microstructural Nanoheterogeneity

Effect of rare earth La–Ce on solidification structure of 3.2%Si-0.9%Al non-oriented silicon steel

Research on the improvement and mechanism of La-Ce on inclusions in GCr15 bearing steel

Analysis of MnS Inclusions Formation in Resulphurised Steel via Modeling and Experiments

Localized Corrosion Induced by Nonmetallic Inclusions in Rebar HRB400E Alloyed with Rare Earth

Effect of Ti and rare earth on microsegregation and large-sized precipitates of H13 steel

Effect of sulfur content on precipitation behaviour of MnS-containing inclusions in X70 pipeline steel