Abstract:In order to study the effects of rare earth La–Ce alloying treatment on the characteristics of inclusions in non-oriented silicon steels, industrial experiments were conducted studying the composition, morphology, size and quantity of inclusions in W350 non-oriented silicon steel during the RH (Ruhrstahl-Hereaeus) refining process and tundish process, after rare earth treatment. The products were analyzed by means of ICP-MS (inductively coupled plasma mass spectrometry), SEM/EDS (scanning electron microscope-energy dispersive spectrometry), and ASPEX (automated SEM/EDS inclusion analysis). The research results showed that the types of inclusions in experimental steel changed significantly after rare earth treatment. The types of inclusions after RE (rare earth) treatment are typically rare earth composite inclusions that are mainly composed of (La, Ce)Al2O3, and conventional inclusions. The addition of rare earth promotes the agglomeration of inclusions; the morphologies of the inclusions are mostly blocky, and some are distributed in long strips. After rare earth treatment during the RH refining process, the number of inclusions with sizes of 1.0~3.5 μm in the experimental steel is increased, and the average size of the inclusions is 2.66 μm. In addition, the number of inclusions larger than 4 μm in the specimens increases due to the collision and growth of inclusions caused by the RH circulation. After rare earth treatment during the tundish process, the number of micro inclusions with sizes of 1.0~2.5 μm in the specimen steels decreases, while the number of inclusions larger than 5 μm increases. The size distribution of micro inclusions in hot-rolled sheets after rare earth treatment was studied using TEM (transmission electron microscopy). In the specimens without rare earth, the content of micro inclusions (≤1 μm) is 51,458.2/mm2 and the average size is 0.388 μm. In the specimens with rare earth added, the content of micro inclusions (≤1 μm) is 24,230.2/mm2 and the average size is 0.427 μm. Compared to sheet produced by the original process, the iron loss of the 0.35 mm finished experimental sheet is reduced by 0.068 W/kg, and the magnetic induction is increased by 0.007 T. The iron loss of the 0.50 mm finished experimental sheet is reduced by 0.008 W/kg, and the magnetic induction is increased by 0.004 T. After rare earth treatment, the average size of micro inclusions increases and the magnetic properties are obviously improved.

Effect of rare earth La–Ce on solidification structure of 3.2%Si-0.9%Al non-oriented silicon steel

Effect of rare earth Ce on the microstructure and mechanical properties of cast Al–7Si alloys

Influence mechanism of rare earth (RE) on inclusion modification in non-oriented silicon steel

Study on mechanism of refining and modifying in Al-Si-Mg casting alloys with adding rare earth cerium

Effects of Rare Earth La–Ce Alloying Treatment on Modification of Inclusions and Magnetic Properties of W350 Non-Oriented Silicon Steel

Structure and Property Modulations of 13cr Stainless Steel Through Microgravity Solidification and Minor Ce Addition

Influence of cerium treatment on inclusion modification and as-cast microstructure of high-strength low-alloy steel

Effect of Ce Addition on Castability, Mechanical Properties and Electric Conductivity of Al–0.3Si–0.2Mg Alloy

Effect of rare-earth Ce on the texture of non-oriented silicon steels

Study on Influence of Rare Earth Ce on Micro and Macro Properties of U75V Steel

The Influence of the Combined Addition of La–Ce Mixed Rare Earths and Sr on the Microstructure and Mechanical Properties of AlSi10MnMg Alloy

Effect of Rare Earth on Microstructure of Γ-Tial Intermetallics

Effect of Ce-rich rare earth on structure and mechanical properties of Al-Si7-Mg0.8 alloy by lost foam casting

Effect of rare earth elements on anisotropy and microstructure of Al-Li alloy 2195 sheets

Effects of Mg, Si and multiple rare earth addition on microstructures of Al 3Ti /A356 composites

Eutectic Solidification in Near-eutectic Al-Si Casting Alloys

Influence of rare earth metals on the nucleation and solidification behavior of iron and 1045 steel

Effect of Rare Earth Ce on Structure and Properties in 7CrSiMnMoV Die Steel Castings

Effects of RE on Microstructures and Properties of Al-20Si-2Cu-1Ni Aluminum Alloy

Effect of rare-earth Sc on the interface microstructure and mechanical properties of Al/steel bimetallic composites prepared by liquid–solid casting

Effect of trace rare earth La on microstructure and properties of Al-7Si-0.6 Fe alloy