Abstract:InGaN-based light emitting diodes (LEDs) are known to suffer from low electron and hole wavefunction overlap due to high piezoelectric field. Staggered InGaN quantum wells (QWs) have been proposed to increase the wavefunction overlap and improve the efficiency of LEDs especially for long wavelength emitters. In this work we evidence that the growth of staggered QWs has also another beneficial effect as it allows to reduce the formation of defects, responsible for nonradiative Shockley-Read-Hall recombination, at the bottom interface of the QW. Staggered QWs comprised an InGaN layer of an intermediate In content between the barrier and the QW. We show that insertion of such a layer results in a significant increase of the luminescence intensity, even if the calculated wavefunction overlap drops. We study the dependence of the thickness of such an intermediate In content layer on photoluminescence (PL) intensity behavior. Staggered QWs exhibit increased cathodoluminescence (CL) homogeneity that is a fingerprint of lower density of defects, in contrast to standard QWs for which high density of dark spots are observed in QW emission mapping. Transmission electron microscopy of standard QWs revealed formation of basal-plane stacking faults (BSFs) and voids that could have resulted from vacancy aggregation. Stepwise increase of the In content in staggered QWs prevents formation of point defects and results in an increased luminescence efficiency. The In composition difference between the barrier and the well is therefore a key parameter to control the formation of point defects in the high-In content QWs, influencing the luminescence efficiency.

The Influence of the Waveguide Layer Composition on the Emission Parameters of 1550 nm InGaAs/InP Laser Heterostructures

Optical and electrical properties of bandgap shifted 1.55-/spl mu/m laser diodes

Epitaxy and Physical Properties of 1.31μm Vertical Cavity Surface-Emitting Lasers

Influence of Gaasp Insertion Layers on Performance of Ingaasp/Ingap/Algaas Quantum-Well Laser

Optical and electrical properties of bandgap shifted 1.55-μm laser diodes

Gain and Threshold Improvements of 1300 nm Lasers based on InGaAs/InAlGaAs Superlattice Active Regions

Temperature dependence of photoluminescence from as-grown and plasma-etched InAs0.45P0.55/In0.68Ga0.32As0.45P0.55 strained single quantum well

Planar waveguide nanolaser configured by dye-doped hybrid nanofilm on substrate

Influence of layer deformation on thermal quenching of exciton photoluminescence in short-period GaAs/AlAs superlattices

Enhancing Performance of GaN-based LDs by Using GaN/InGaN Asymmetric Lower Waveguide Layers

Quantum well-based waveguide for semiconductor lasers

Investigation of GaAs-Based Laser Diode Adopting an Al Composition Gradient Double Waveguide Structure and its Photoelectric Properties

The Critical Impact of the Waveguide Thickness on the Optical and Threshold Behaviors of InGaN-based Green Laser Diodes

Theory and design of In$_{x}$Ga$_{1-x}$As$_{1-y}$Bi$_{y}$ mid-infrared semiconductor lasers: type-I quantum wells for emission beyond 3 $μ$m on InP substrates

Development of Modulation p-Doped 1310 nm InAs/GaAs Quantum Dot Laser Materials and Ultrashort Cavity Fabry–Perot and Distributed-Feedback Laser Diodes

Band engineering in dilute nitride and bismide semiconductor lasers

Characterization of GaInN/GaN layers for green emitting laser diodes

The influence of inhomogeneities and defects on novel quantum well and quantum dot based infrared-emitting semiconductor lasers

Effect of design and stress relaxation on structural, electronic, and luminescence properties of metamorphic InAs(Sb)/In(Ga,Al)As/GaAs mid-IR emitters with a superlattice waveguide

High Power 808nm AlGaAs/GaAs Quantum Well Laser Diodes with Broad Waveguide

Impact of interfaces on photoluminescence efficiency of high indium content InGaN quantum wells