Abstract:Electrospun nanocomposite polymer blend poly(vinylidene difluoride-co-hexafluoropropylene) (PVDF-HFP)/poly(methyl methacrylate) (PMMA) membranes with a novel dispersion of x wt % of one-dimensional (1D) TiO2 nanofiber fillers (x = 0.0-0.8 in steps of 0.2) were developed using the electrospinning technique. The developed nanocomposite polymer membranes were activated using various redox agents such as LiI, NaI, KI, and tetrabutyl ammonium iodide (TBAI). Introduction of the 1D TiO2 nanofiber fillers improves the amorphous nature of the blended polymer membrane, as confirmed through X-ray diffraction (XRD) and Fourier transform infrared (FTIR), and yielded an electrolyte uptake of over 480% for a 6 wt % TiO2 nanofiber filler-dispersed sample. PVDF-HFP/PMMA-1D 6 wt % TiO2 nanofiber fillers with the LiI-based redox electrolyte provided a high conductivity of 2.80 × 10-2 S cm-1 and a power conversion efficiency (PCE) of 8.08% to their fabricated dye-sensitized solar cells (DSSCs). The observed better ionic conductivity and efficiency of the fabricated DSSCs could be due to the faster movement of the smaller-ionic-radius (Li) ions entrapped inside the amorphous polymer. This enhanced mobility of ions in the quasi-solid electrolyte leads to faster regeneration of the depleting electrons in the photoanode, resulting in improved efficiency. Further, the achieved high conductivity was analyzed in terms of the dynamics and relaxation mechanisms involved by the ionic charge carriers with complex impedance spectroscopy using a random barrier model and Havriliak-Negami formulation. It was observed that the high-conducting PVDF-HFP/PMMA-1D 6 wt % TiO2 nanofiber fillers with LiI-based redox electrolyte show better ac conductivity parameters such as a σ of 5.82 × 10-2 S cm-1, ωe (12685 rad s-1), τe (0.909 × 10-4 s), and n (0.578). Also, dielectric studies revealed that the high-conducting sample has a higher dielectric constant and subsequently high loss. The J-V characteristics were studied using the equivalent circuit of a single-diode model, and the parameters influencing the photovoltaic performance were determined by Symbiotic Organisms Search (SOS) algorithm. The results suggest that the high-efficient sample possesses a minimum series resistance of 1.33 Ω and a maximum shunt resistance of 997 Ω. Hence, the highest-conducting electrospun-blended polymeric nanocomposite (PVDF-HFP-PMMA-6 wt % TiO2 nanofiber fillers) with LiI-based redox agent and tert-butyl pyridine (TBP) additive as the polymer quasi-solid electrolyte nanofibrous membrane can be a better electrolyte for high-performance dye-sensitized solar cell applications.

Polymer blending and nanophotocatalyst loading synergy in visible light‐driven photocatalytic PES/SPSf mixed matrix membranes

Novel polysulfone hybrid ultrafiltration membrane prepared with TiO2-g-HEMA and its antifouling characteristics

Fabrication of novel polyethersulfone (PES) photocatalytic membranes with excellent permeability and antifouling properties using TiO2–AgBr–Ag–SBA-15 nanofillers for cefixime removal

Electrolyte-responsive polyethersulfone membranes with zwitterionic polyethersulfone-based copolymers as additive

Enhancing Water Purification by Integrating Titanium Dioxide Nanotubes into Polyethersulfone Membranes for Improved Hydrophilicity and Anti-Fouling Performance

Efficiency enhancement due to the combined mixed cation effect and TiO2 nanofiller effect in PEO and ionic liquid-based dye-sensitized solar cells

Enhancing antifouling and separation characteristics of carbon nanofiber embedded poly ether sulfone nanofiltration membrane

Polyethersulfone ultrafiltration membranes co‐blended with amphiphilic polymers and nitrogen‐doped titanium dioxide nanoparticles for anti‐fouling and photocatalysis

Morphology and characteristics of polyethersulfone membrane modified with polyethylene glycol hexadecyl ether and nanocarbon

Bandgap tuning of TiO2 by Cu nanoparticles applied in photocatalytic antifouling-coated PES membranes through PAA-plasma grafted adhesive layer

The Application of TiO2/ZrO2-Modified Nanocomposite PES Membrane for Improved Permeability of Textile Dye in Water

A novel synergistic effect of TiO2 and ZnO incorporation in PES-based thin-film nanocomposite nanofiltration membrane for treatment of textile wastewater

Flexible Polyaniline-Coated Tio2/Sio2 Nanofiber Membranes with Enhanced Visible-Light Photocatalytic Degradation Performance

Novel Dispersion of 1D Nanofiber Fillers for Fast Ion-Conducting Nanocomposite Polymer Blend Quasi-Solid Electrolytes for Dye-Sensitized Solar Cells

Fabrication and characterization of (PVDF/PEO)/AgBiSe2 polymeric membrane with enhanced visible light photocatalytic performance

Polysulfone-based amphiphilic polymer for hydrophilicity and fouling-resistant modification of polyethersulfone membranes

Investigating the Impact of the Sulfonation Degree in Sulfonated Polyphenylsulfone (sPPSU) on PES/sPPSU Polymer Blend Membranes

Surface modification of PES-nano ZnO membrane for enhanced performance in rubber wastewater treatment

Nano-enhanced sulfonated poly(arylene ether sulfone) composite membranes and their characterization

Enhancing the Antifouling and Antimicrobial Properties of Poly(ether sulfone) Membranes by Surface Quaternization from a Reactive Poly(ether sulfone) Based Copolymer Additive

Synergistic contribution of sulfonated poly(ether sulfone) and iminodiacetic acid functionalized-graphene oxide nanosheets towards enhancing cationic dye wastewater purification using nanocomposite membranes