Abstract:Electrospun nanocomposite polymer blend poly(vinylidene difluoride-co-hexafluoropropylene) (PVDF-HFP)/poly(methyl methacrylate) (PMMA) membranes with a novel dispersion of x wt % of one-dimensional (1D) TiO2 nanofiber fillers (x = 0.0-0.8 in steps of 0.2) were developed using the electrospinning technique. The developed nanocomposite polymer membranes were activated using various redox agents such as LiI, NaI, KI, and tetrabutyl ammonium iodide (TBAI). Introduction of the 1D TiO2 nanofiber fillers improves the amorphous nature of the blended polymer membrane, as confirmed through X-ray diffraction (XRD) and Fourier transform infrared (FTIR), and yielded an electrolyte uptake of over 480% for a 6 wt % TiO2 nanofiber filler-dispersed sample. PVDF-HFP/PMMA-1D 6 wt % TiO2 nanofiber fillers with the LiI-based redox electrolyte provided a high conductivity of 2.80 × 10-2 S cm-1 and a power conversion efficiency (PCE) of 8.08% to their fabricated dye-sensitized solar cells (DSSCs). The observed better ionic conductivity and efficiency of the fabricated DSSCs could be due to the faster movement of the smaller-ionic-radius (Li) ions entrapped inside the amorphous polymer. This enhanced mobility of ions in the quasi-solid electrolyte leads to faster regeneration of the depleting electrons in the photoanode, resulting in improved efficiency. Further, the achieved high conductivity was analyzed in terms of the dynamics and relaxation mechanisms involved by the ionic charge carriers with complex impedance spectroscopy using a random barrier model and Havriliak-Negami formulation. It was observed that the high-conducting PVDF-HFP/PMMA-1D 6 wt % TiO2 nanofiber fillers with LiI-based redox electrolyte show better ac conductivity parameters such as a σ of 5.82 × 10-2 S cm-1, ωe (12685 rad s-1), τe (0.909 × 10-4 s), and n (0.578). Also, dielectric studies revealed that the high-conducting sample has a higher dielectric constant and subsequently high loss. The J-V characteristics were studied using the equivalent circuit of a single-diode model, and the parameters influencing the photovoltaic performance were determined by Symbiotic Organisms Search (SOS) algorithm. The results suggest that the high-efficient sample possesses a minimum series resistance of 1.33 Ω and a maximum shunt resistance of 997 Ω. Hence, the highest-conducting electrospun-blended polymeric nanocomposite (PVDF-HFP-PMMA-6 wt % TiO2 nanofiber fillers) with LiI-based redox agent and tert-butyl pyridine (TBP) additive as the polymer quasi-solid electrolyte nanofibrous membrane can be a better electrolyte for high-performance dye-sensitized solar cell applications.

Efficiency enhancement due to the combined mixed cation effect and TiO2 nanofiller effect in PEO and ionic liquid-based dye-sensitized solar cells

Efficiency enhancement by mixed cation effect in dye-sensitized solar cells with a PVdF based gel polymer electrolyte

Enhancing the Performance of Nanocrystalline TiO2 Dye-Sensitized Solar Cells with Phenothiazine-Doped Blended Solid Polymer Electrolyte

Novel Dispersion of 1D Nanofiber Fillers for Fast Ion-Conducting Nanocomposite Polymer Blend Quasi-Solid Electrolytes for Dye-Sensitized Solar Cells

Mixed cation effect and iodide ion conductivity in electrolytes for dye sensitized solar cells

Poly(ethylene glycol)/poly(vinylidene) fluoride/TiO2 nanoparticle composite for sandwiched solid-state dye-sensitized solar cells

Enhanced efficiency in dye-sensitized solar cell based on zinc oxide-modified poly(ethylene oxide) gel electrolyte

High efficiency dye-sensitized nanocrystalline solar cells based on ionic liquid polymer gel electrolyte.

Efficiency enhancement of dye-sensitized solar cell with PVdF-HFP:MPII:NaI quasi-solid-state electrolyte

High efficiency dye-sensitized nanocrystalline solar cells based on ionic liquid polymer gel electrolyteElectronic supplementary information (ESI) available: fabrication procedure for the DSSCs. See http://www.rsc.org/suppdata/cc/b2/b209322g/

Sonochemically tailored Copper Oxide as nanofiller in terpolymer composite gel electrolytes for dye-sensitized solar cells

Ionic liquid effect for efficiency improvement in poly(methyl acrylate)/poly(vinyl acetate)-based dye-sensitized solar cells

Enhance the Optical Absorptivity of Nanocrystalline TiO2 Film with High Molar Extinction Coefficient Ruthenium Sensitizers for High Performance Dye-Sensitized Solar Cells.

Synthesis of a series of novel imidazolium-containing ionic liquid copolymers for dye-sensitized solar cells

The Electrically Conductive Function Of High-Molecular Weight Poly(Ethylene Oxide) In Polymer Gel Electrolytes Used For Dye-Sensitized Solar Cells

Review—Polyethylene Oxide-Based Nanocomposites as Polymer Electrolytes for Dye-Sensitized Solar Cell Application

Enhanced Performance of Dye Sensitized Solar Cells Through the Incorporation of Al 2 O 3 Nanofillers in Polymer Electrolytes

Efficiency enhancement in dye-sensitized solar cells with a novel PAN-based gel polymer electrolyte with ternary iodides

Polyvinylidene fluoride‐co‐hexafluoropropylene polymer gel electrolyte‐enabled dye‐sensitized solar cell for sustainable energy

Enhancing dye-sensitized solar cells efficiency through organic dyes-sensitized holmium-doped TiO 2 /SnO 2 nanocomposites blended with P3HT

Enhancement of photocurrent of dye-sensitized solar cell by composite liquid electrolyte including NiO nanosheets.