Abstract:Highlights • Bandgap tuning of TiO 2 by CuO nanoparticles for improved photocatalytic activity. • Photocatalytic mechanism confirmed by the major contributions of h + and e − agents. • Under UV + PMS conditions, photocatalytic efficiency reaches the highest at 90%. • Membrane antifouling ability showed an FRR of 98.8% and lower surface roughness. • Membrane hydrophilization by O 2 plasma and PAA layer showed enhanced pure water flux. Background One direction to mitigate membrane fouling is to create anti-fouling photocatalytic membranes. The photocatalysts' hydrophilicity reduces the interaction of the membrane with hydrophobic foulants and the photocatalysis decomposes membrane fouling. Another noteworthy point is that PMS (peroxymonosulfate) can be activated by photocatalysts to decompose foulants and membrane fouling more intensely. Methods The CuO/TiO 2 was prepared by deposition of Cu(OH) 2 onto TiO 2 followed by heat treatments. Their catalytic performances were tested by the degradation of Acid Blue 260 by photocatalysis and PMS activation. The best CuO/TiO 2 was then coated onto PVDF membranes through a PAA binding layer. Their antifouling performance was examined through simulated foulants such as sodium alginate. The photocatalysts and membranes were characterized using FTIR, SEM-EDS, TEM, XRD, BET, UV–Vis DRS, XPS, ESR, and AFM. Significant Findings The CuO/TiO 2 possessed a lower bandgap, high surface area (60.7 m 2 /g), and low particle sizes (30–60 nm). The 25%CuO/TiO 2 possesses the highest photocatalytic degradation efficiency of 39.0% under UV irradiation; further PMS activation caused the removal efficiency to reach 90.0%. The degradation efficiency by the membrane was 100% after five cycles. The membranes indicated a decrease of 18.9% in water flux but remained very high. The membrane flux recovery ratio (FRR) was 98.8%. Graphical abstract Download : Download high-res image (212KB) Download : Download full-size image

Bandgap tuning of TiO2 by Cu nanoparticles applied in photocatalytic antifouling-coated PES membranes through PAA-plasma grafted adhesive layer

Photocatalysis and PMS activation caused by CuO/TiO 2 photocatalyst coated on PVDF membrane for mitigating membrane fouling

Synthesis and Characterisation of Self-Cleaning TiO2/PES Mixed Matrix Membranes in the Removal of Humic Acid

Fabrication of novel polyethersulfone (PES) photocatalytic membranes with excellent permeability and antifouling properties using TiO2–AgBr–Ag–SBA-15 nanofillers for cefixime removal

Fouling mechanism of low-pressure hollow fiber membranes used in separating nanosized photocatalysts

Titania Nanowires Coated PEI/P25 Membranes for Photocatalytic and Ultrafiltration Applications

Polyethersulfone ultrafiltration membranes co‐blended with amphiphilic polymers and nitrogen‐doped titanium dioxide nanoparticles for anti‐fouling and photocatalysis

Modifications of polyethersulfone membrane by doping sulfated-TiO 2 nanoparticles for improving anti-fouling property in wastewater treatment

Polyethersulfone Membranes Prepared with 3-Aminopropyltriethoxysilane Modified Alumina Nanoparticles for Cu(II) Removal from Water

Nanoarchitectonics of CuO/α-Fe2O3/BiVO4 Photocatalysts with Double Heterojunctions on PVDF Membranes: Investigating Sulfadiazine Removal and Antifouling Properties

Polypropylene Microfiltration Membranes Modified with TiO2 Nanoparticles for Surface Wettability and Antifouling Property

Enhancing the Antifouling and Antimicrobial Properties of Poly(ether sulfone) Membranes by Surface Quaternization from a Reactive Poly(ether sulfone) Based Copolymer Additive

Photocatalytic and antifouling properties of TiO2-based photocatalytic membranes

Photocatalytic and antifouling performance of titania-coated alumina membranes produced using a facile sol-gel dip-coating approach

Engineering High-Effective Antifouling Polyether Sulfone Membrane with P(Peg-Pdms-Kh570)@Sio2 Nanocomposite Via In-Situ Sol-Gel Process

Enhancing Water Purification by Integrating Titanium Dioxide Nanotubes into Polyethersulfone Membranes for Improved Hydrophilicity and Anti-Fouling Performance

Super-hydrophilic TiO2-based coating of anion exchange membranes with improved antifouling performance

Modified Polyethersulfone Ultrafiltration Membrane for Enhanced Antifouling Capacity and Dye Catalytic Degradation Efficiency

Preparation of Nano-TiO2-Modified PVDF Membranes with Enhanced Antifouling Behaviors via Phase Inversion: Implications of Nanoparticle Dispersion Status in Casting Solutions

Polymer blending and nanophotocatalyst loading synergy in visible light‐driven photocatalytic PES/SPSf mixed matrix membranes

Efficient Fenton-Like Catalysis Boosting the Antifouling Performance of the Heterostructured Membranes Fabricated via Vapor-Induced Phase Separation and In Situ Mineralization