Abstract:Metal organic framework (MOF)-derivatives have a larger specific surface area, higher porosity, tunable pore size, higher conductivity, good stability, more exposed active species, etc., but few literature are reported about their application potential in micropollutant separation and removal. In view of this, a robust MOF derivative-based photocatalytic superhydrophobic membrane (D6/TiO2/MoS2/NiCo-NC/PVDF) was successfully fabricated for the first time through solvothermal synthesis and chemical modification, combined with a negative pressure-assisted loading approach. (1) The MoS2-doping strategy effectively avoided the collapse and coarsening of cauliflower-like MOFs during the calcination phase and simultaneously ensured the uniform distribution of metal particles in MOF-derived carbons. (2) The synergistic catalysis of the NiCo-MOF derivative, MoS2, and TiO2 enhanced the transfer efficiency of electrons and free radicals, achieving efficient in situ degradation of pesticides and pharmaceutical and personal care products. (3) The introduction of sodium alginate greatly improved the adhesion between the coating and polyvinylidene fluoride (PVDF) membrane and simultaneously enhanced the growth of MOFs through complexation. (4) The cauliflower-like MOF-derived carbon skeleton with higher surface areas and micronanoporosity combined with a heterogeneous MoS2 structure provided a large specific surface area and enough adsorption sites for various pollutants. High thermal calcination treatment greatly enhanced MOF growth rate, thus resulting in a flaky structure with high regularity and a large specific area. (5) The ultralow surface energy of interlaced siloxane molecules endowed the hybrid membrane with robust superhydrophobicity and superoleophilicity, always maintaining superhydrophobicity after long-time photodegradation. The final membrane achieved continuous emulsion separation and a photocatalytic self-cleaning property. The separation efficiency of the hybrid membrane for emulsions was still up to 97% after reuse for 120 cycles, and it could degrade 86.5% PRO, 90.1% ACE, 92.1% ASP, and 94.3% SMZ, respectively, with the initial concentration of 10 mg/L. The driving forces for oil-water separation and decontamination of the D6/TiO2/MoS2/NiCo-NC/PVDF membrane mainly involved the grasping forces of dodecamethylcyclohexasiloxane, capillary force of inner pores, electrostatic interaction, hydrogen bond interaction, partial p-pi conjugation, van der Waals force, and lipophilicity.

Polyethersulfone ultrafiltration membranes co‐blended with amphiphilic polymers and nitrogen‐doped titanium dioxide nanoparticles for anti‐fouling and photocatalysis

Photocatalytic and Superhydrophobic Nanoporous Membranes for Emulsion Separation and Removal of Pesticides and Pharmaceutical Products

Enhancing Water Purification by Integrating Titanium Dioxide Nanotubes into Polyethersulfone Membranes for Improved Hydrophilicity and Anti-Fouling Performance

Titania Nanowires Coated PEI/P25 Membranes for Photocatalytic and Ultrafiltration Applications

Novel polysulfone hybrid ultrafiltration membrane prepared with TiO2-g-HEMA and its antifouling characteristics

Fouling mechanism of low-pressure hollow fiber membranes used in separating nanosized photocatalysts

Modified Polyethersulfone Ultrafiltration Membrane for Enhanced Antifouling Capacity and Dye Catalytic Degradation Efficiency

Synthesis and Characterisation of Self-Cleaning TiO2/PES Mixed Matrix Membranes in the Removal of Humic Acid

PAN/TiO2 Ultrafiltration Membrane for Enhanced BSA Removal and Antifouling Performance

Dye Degrading and Fouling-Resistant Membranes Formed by Deposition with Ternary Nanocomposites of N-Doped Graphene/TiO₂/Activated Carbon

TiO 2 nanoparticle embedded PEEKWC/PEI cross-linked ultrafiltration membrane: Improvement in flux and anti-fouling properties

Engineering High-Effective Antifouling Polyether Sulfone Membrane with P(Peg-Pdms-Kh570)@Sio2 Nanocomposite Via In-Situ Sol-Gel Process

Construction of PES membranes using NH2-MIL-125 and Pluronic F127 via RTIPS method toward elevated ultrafiltration, antifouling and self-cleaning performance

Self-cleaning Anti-fouling TiO2/Poly(aryl ether sulfone) Composite Ultrafiltration Membranes

Polypropylene Microfiltration Membranes Modified with TiO2 Nanoparticles for Surface Wettability and Antifouling Property

Pioneering Biofouling Resistant PES UF Membrane with MnFe2O4/g-C3N4 Nanocomposite: Insight into Mechanisms and Fouling Dynamics

Visible-light-activated Fe2O3-TiO2 nanoparticles enhance biofouling resistance of polyethersulfone ultrafiltration membranes against marine algae Chlorella vulgaris

Improved Antifouling Properties of Poly(Ether Sulfone) Membrane by Incorporating the Amphiphilic Comb Copolymer with Mixed Poly(Ethylene Glycol) and Poly(Dimethylsiloxane) Brushes

Electrospun PVDF/PVP Fibrous Membrane with Photocatalytic and Superhydrophilic Properties

Preparation and anti-biofouling performance of PSf/TiO2 ultrafiltration membrane by in-situ embedment approach

Anti-Fouling and Anti-Bacterial Polyethersulfone Membranes Quaternized from the Additive of Poly(2-Dimethylamino Ethyl Methacrylate) Grafted Sio2 Nanoparticles